Surface Mount Ultra Fast Rectifier FUXINSEMI MURA260T3G-FS 2 Ampere 600 Volt Halogen Free
Key Attributes
Model Number:
MURA260T3G-FS
Product Custom Attributes
Non-Repetitive Peak Forward Surge Current:
35A
Reverse Leakage Current (Ir):
5uA@4V
Reverse Recovery Time (trr):
50ns
Voltage - DC Reverse (Vr) (Max):
600V
Diode Configuration:
Independent
Operating Junction Temperature Range:
-55℃~+175℃
Voltage - Forward(Vf@If):
1.45V@2A
Current - Rectified:
2A
Mfr. Part #:
MURA260T3G-FS
Package:
SMA(DO-214AC)
Product Description
Product Overview
The MURA260T3G-FS is a 2.0A Surface Mount Ultra Fast Rectifier with a maximum reverse voltage of 600V. It is designed for applications requiring fast switching speeds and high efficiency. This rectifier is compliant with Halogen-free standards.
Product Attributes
- Type: Surface Mount Ultra Fast Rectifier
- Compliance: Halogen-free
Technical Specifications
| Parameter | Symbol | Units | Value |
|---|---|---|---|
| Maximum Ratings (AT TA =25 C unless otherwise noted) | |||
| Maximum average forward rectified current | IO | A | 2.0 |
| Maximum repetitive peak reverse voltage | VRRM | V | 600 |
| Non-repetitive peak forward surge current 8.3ms single half sine-wave | IFSM | A | 15 |
| Maximum RMS voltage | VRMS | V | 420 |
| Storage temperature range | TSTG | C | -65 to 175 |
| Operating junction temperature range | TJ | C | -65 to 175 |
| Electrical Characteristics (AT TA =25 C unless otherwise noted) | |||
| Maximum instantaneous forward voltage at IF = 2.0A | VF | V | 1.45 |
| Maximum reverse leakage current at rated VR | IR | A | 50 |
| Maximum reverse recovery time, (Note 2) | trr | ns | 25 |
| Typical junction capacitance (Note 1) | CJ | pF | 15 |
| Thermal Characteristics (Note 3) | |||
| Typical thermal resistance junction to ambient | RJA | C / W | 55 to 175 |
| Typical thermal resistance junction to case | RJC | C / W | 2.0 |
Notes:
- 1: Measured at 1 MHz and applied reverse voltage of 4.0 VDC
- 2: Measured with IF = 0.5 A, IR = 1 A, Irr = 0.25 A
- 3: Mounted on FR-4 PCB Copper, minimum recommended pad layout
2512291555_FUXINSEMI-MURA260T3G-FS_C7503103.pdf
Related Products
Glass passivated chip diode YONGYUTAI MB8S offering performance in power supply and rectification circuits
Product OverviewThis series of glass passivated chip junction diodes offers a wide range of reverse voltage capabilities from 100V to 1000V, with a forward current of 0.8A and high surge current capability. Designed for surface mount applications, these diodes are suitable for various power supply ...
complementary mosfets featuring xnrusemi xr20g10 with n channel and p channel fast switching capabilities
XR20G10 N-Ch and P-Ch Fast Switching MOSFETs Product Description The XR20G10 is a high-performance complementary N-channel and P-channel MOSFET series featuring extreme high cell density. This design provides excellent RDS(ON) and gate charge characteristics, making it ideal for synchronous buck ...
Power electronics IGBT YANGJIE MG150HF12TLC1 featuring trench technology and ultra fast soft recovery anti parallel FWD
Product OverviewThe MG150HF12TLC1 S-M409 is a high-performance IGBT module designed for demanding power electronics applications. It features low VCE(sat) with Trench technology, a positive temperature coefficient for VCE(sat), high short circuit capability, and an integrated ultra-fast & soft ...
Digital Transistor YANGJIE UMH11N Dual NPN Type with Built In Bias Resistors and Surface Mount Design
Product OverviewThe UMH11N is a dual NPN digital transistor featuring built-in bias resistors, allowing for inverter circuit configuration without external input resistors. It is designed for surface mount applications and is ideally suited for automatic insertion. The epoxy meets UL-94 V-0 ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
