AOS AIM5D10B060M1S Dual Inline Package IPM with Comprehensive Protection and Integrated HVIC Drivers
Key Attributes
Model Number:
AIM5D10B060M1S
Product Custom Attributes
Mfr. Part #:
AIM5D10B060M1S
Product Description
Product Overview
The AIM5D10B060M1 / AIM5D10B060M1S is a Dual-In-Line Package Intelligent Power Module designed for 600V-10A applications. It features a 3-phase inverter with integrated HVIC drivers, built-in bootstrap diodes with current limiting resistors, and comprehensive protection features including control supply under-voltage lockout (UVLO), over-temperature (OT) protection, and short-circuit current (CSC) protection. The module provides a fault out signal (VFO) for various fault conditions and offers a wide input interface with Schmitt trigger receiver circuits. It is ideal for low-power motor drives in applications such as refrigerators, dishwashers, fan motors, washing machines, and air conditioners.
Product Attributes
- Brand: AOS (Alpha & Omega Semiconductor)
- Certifications: UL Recognized (UL1557 File E345245)
- Compliance: RoHS compliant, AOS Green Products
Technical Specifications
| Model | Temperature Range | Package Description |
|---|---|---|
| AIM5D10B060M1 | -40C - +150C | IPM-5 Normal pin length |
| AIM5D10B060M1S | -40C - +150C | IPM-5A Short pin length |
| Parameter | Conditions | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| Inverter Part | |||||
| Supply voltage (VPN) | Applied between P - NU,NV,NW | 0 | - | 450 | V |
| Supply voltage (surge) (VPN(surge)) | Applied between P - NU,NV,NW | - | - | 500 | V |
| Collector-emitter voltage (VCES) | - | - | 600 | V | |
| Output phase current (IC) | TC=25C, TJ<150C | - | - | 10 | A |
| Output phase current (IC) | TC=100C, TJ<150C | - | - | 5 | A |
| Output peak phase current (IPK) | TC=25C, less than 1ms pulse width | - | - | 20 | A |
| Short circuit withstand time (tSC) | VPN400V, TJ=150C, VD=15V (Note 1) | - | - | 5 | s |
| Collector dissipation (PC) | TC=25C, per 1 chip | - | - | 23 | W |
| Operating junction temperature (TJ) | -40 | - | +150 | C | |
| Control (Protection) Part | |||||
| Control supply voltage (VD) | Applied between VD(H)-COM, VD(L)-COM | 13.5 | 15.0 | 16.5 | V |
| High-side control bias voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 13.5 | 15.0 | 18.5 | V |
| Input voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) - COM | VD0.5 | - | VD0.5 | V |
| Fault output supply voltage (VFO) | Applied between VFO - COM | VD0.5 | - | VD0.5 | V |
| Fault output current (IFO) | Sink current at VFO terminal | - | - | 1 | mA |
| Current sensing input voltage (VSC) | Applied between CSC - COM | 50.5 | - | - | V |
| Temperature output (VOT) | Applied between VOT - COM | 50.5 | - | - | V |
| Total System | |||||
| Self protection supply voltage limit (VPN(PROT)) | VD=13.5-16.5V, Inverter part TJ=150C, Non-repetitive, less than 2s | - | - | 400 | V |
| Module case operation temperature (TC) | Measurement point of TC is provided in Figure 1 | -30 | - | +125 | C |
| Storage temperature (TSTG) | -40 | - | +150 | C | |
| Isolation voltage (VISO) | 60Hz, sinusoidal, AC 1min, between connected all pins and heat sink plate | - | 2000 | - | Vrms |
| Thermal Resistance | |||||
| Junction to case thermal resistance (Rth(j-c)Q) | Inverter IGBT part (per 1/6 module) (Note 2) | - | - | 5.4 | K/W |
| Junction to case thermal resistance (Rth(j-c)F) | Inverter FWD part (per 1/6 module) (Note 2) | - | - | 6.9 | K/W |
| Electrical Characteristics | |||||
| Collector-emitter saturation voltage (VCE(SAT)) | VD=VDB=15V, VIN=5V, IC=5A, TJ=25C | - | 1.60 | 2.00 | V |
| Collector-emitter saturation voltage (VCE(SAT)) | VD=VDB=15V, VIN=5V, IC=5A, TJ=125C | - | 1.90 | - | V |
| FWD forward voltage (VF) | VIN=0, IF=5A, TJ=25C | - | 1.48 | 1.90 | V |
| Switching times (tON) | VPN=300V, VD=VDB=15V, IC=5A, TJ=25C, VIN=0V 5V, Inductive load (high-side) | 0.30 | - | 1.10 | s |
| Switching times (tOFF) | VPN=300V, VD=VDB=15V, IC=5A, TJ=25C, VIN=0V 5V, Inductive load (high-side) | 1.00 | - | 1.50 | s |
| Collector-emitter leakage current (ICES) | VCE=VCES, TJ=25C | - | - | 1 | mA |
| Collector-emitter leakage current (ICES) | VCE=VCES, TJ=125C | - | - | 10 | mA |
| Quiescent VD supply current (IQDH) | VD(H)=15V, IN(UH, VH, WH)=0V, VD(H) - COM | - | - | 0.1 | mA |
| Quiescent VD supply current (IQDL) | VD(L)=15V, IN(UL, VL, WL)=0V, VD(L) - COM | - | - | 2.1 | mA |
| Quiescent VDB supply current (IQDB) | VDB=15V, IN(UH, VH, WH)=0V, VB(U)-U, VB(V)- V, VB(W)- W | - | - | 0.3 | mA |
| Short-circuit trip level (VSC(ref)) | VD=15V (Note 3) | 0.455 | 0.480 | 0.505 | V |
| Under-voltage protection Trip level (UVDT) | Supply circuit | 9.0 | 10.0 | 11.0 | V |
| Under-voltage protection Reset level (UVDR) | Supply circuit | 10.0 | 11.0 | 12.0 | V |
| Under-voltage protection Trip level (UVDBT) | High-side | 8.5 | 9.5 | 10.5 | V |
| Under-voltage protection Reset level (UVDBR) | High-side | 9.5 | 10.5 | 11.5 | V |
| Temperature output (VOT) | LVIC temperature=90C, Pull down R=10k (Note 4) | 2.74 | 2.92 | 3.10 | V |
| Temperature output (VOT) | LVIC temperature=25C, Pull down R=10k (Note 4) | 1.06 | 1.25 | 1.43 | V |
| Over-temperature protection (OTT) | VD=15V, detect LVIC temperature (Note 5) | 100 | 120 | 140 | C |
| Hysteresis of trip reset (OTHYS) | - | 10 | - | C | |
| Fault output voltage (VFOH) | VSC=0V, VFO circuit: 10k to 5V pull-up | 4.9 | - | - | V |
| Fault output voltage (VFOL) | VSC=1V, VFO circuit: 10k to 5V pull-up | - | - | 0.5 | V |
| Fault output pulse width (tFO) | (Note 6) | 20 | - | - | s |
| Input current (IIN) | VIN=5V | - | 1.0 | - | mA |
| ON threshold voltage (Vth(on)) | Applied between IN(...) COM | 2.3 | 2.6 | - | V |
| OFF threshold voltage (Vth(off)) | Applied between IN(...) COM | 0.8 | - | 1.2 | V |
| ON/OFF threshold hysteresis voltage (Vth(hys)) | Applied between IN(...) COM | - | 1.1 | - | V |
| Bootstrap diode forward voltage (VF(BSD)) | IF=10mA including voltage drop by limiting resistor (Note 7) | 1.0 | - | 2.0 | V |
| Built-in limiting resistance (RBSD) | Included in bootstrap diode | 80 | 100 | 120 | |
| Recommended Operation Conditions | |||||
| Supply voltage (VPN) | Applied between P-NU, NV, NW | 0 | - | 400 | V |
| Control supply voltage (VD) | Applied between VD(H) COM, VD(L) - COM | 13.5 | 15.0 | 16.5 | V |
| High-side bias voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 13.5 | 15.0 | 18.5 | V |
| Control supply variation (dVD/dt, dVDB/dt) | -1 | - | 1 | V/s | |
| Arm shoot-through blocking time (tdead) | For each input signal | 1.0 | - | - | s |
| PWM input frequency (fPWM) | -40C < TJ < 150C | - | - | 20 | kHz |
| Minimum input pulse width (PWIN(ON)) | (Note 9) | 0.4 | - | - | s |
| Minimum input pulse width (PWIN(OFF)) | (Note 9) | 0.4 | - | - | s |
| COM variation | Between COM - NU, NV, NW (including surge) | -5.0 | - | +5.0 | V |
| Mechanical Characteristics | |||||
| Mounting torque | Mounting screw: M3 (Note 8) | 0.59 | 0.69 | 0.78 | N m |
| Weight | - | 5.25 | - | g | |
| Flatness | Refer to Figure 5 | -50 | - | 100 | m |
| Package Dimensions (IPM-5) | |||||
| Dimension A | 8.30 | 8.70 | 9.10 | mm | |
| Dimension D | 33.10 | 33.40 | 33.70 | mm | |
| Dimension E | 18.20 | 18.60 | 19.00 | mm | |
| Package Dimensions (IPM-5A) | |||||
| Dimension A | 8.30 | 8.70 | 9.10 | mm | |
| Dimension D | 33.10 | 33.40 | 33.70 | mm | |
| Dimension E | 18.20 | 18.60 | 19.00 | mm | |
2410301807_AOS-AIM5D10B060M1S_C20266152.pdf
Related Products
High Voltage IGBT Module YANGJIE DGW10N120CTL Featuring Fast Recovery Diode for AC DC Servo Drive Amplifiers
Product Overview The DGW10N120CTL S-M352D is a high-performance IGBT module featuring Low VCE(sat) Trench-FS IGBT technology, a maximum junction temperature of 175, and a positive temperature coefficient. It includes a fast and soft recovery anti-parallel FWD and boasts high short circuit capability ...
Low RDS ON N Channel MOSFET YANGJIE YJG95G06B Suitable for High Current DC DC Converter Applications
Product OverviewThe YJG95G06B is an N-Channel Enhancement Mode Field Effect Transistor manufactured by Yangzhou Yangjie Electronic Technology Co., Ltd. Utilizing Split Gate Trench MOSFET technology and a high-density cell design, this transistor offers low RDS(ON) and excellent heat dissipation ...
NPN General Purpose Amplifier YANGJIE MMBT2222AT SOT523 Package RoHS Compliant Electronic Component
Product OverviewThe MMBT2222AT is an NPN General Purpose Amplifier in a SOT-523 surface mount package, ideally suited for automatic insertion. It offers a moisture sensitivity level of 1 and meets UL-94 V-0 flammability rating, being halogen-free. This component is designed for general-purpose ...
Integrated bias resistor digital transistor YANGJIE DTC143ECA suitable for surface mount and inverter circuit
Product OverviewThe DTC143ECA is a digital transistor with built-in resistors, designed for surface mount applications. Its integrated bias resistors simplify inverter circuit configuration by eliminating the need for external input resistors. This component is manufactured by Yangzhou Yangjie ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
