Brightking AG BK Thyristor Surge Suppressors Ensuring Equipment Meets UL 60950 and TIA 968 Standards
Key Attributes
Model Number:
AG-BK
Product Custom Attributes
Mfr. Part #:
AG-BK
Package:
SMB(DO-214AA)
Product Description
Product Overview
The AG-BK Thyristor Surge Suppressors (TSS) are solid-state protection devices designed for telecommunications equipment, including modems, line cards, fax machines, and other Customer Premises Equipment (CPE). These devices enable equipment to meet stringent regulatory requirements such as GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968. AG-BK devices offer absolute surge protection, unaffected by surge current or rate of applied voltage (dv/dt). They are non-degenerative, do not fatigue, and eliminate hysteresis, heat dissipation, and voltage overshoot associated with clamping devices. Their low capacitance makes them ideal for high-speed transmission equipment. The AG-BK series meets MSL level 1 per J-STD-020.
Product Attributes
- Brand: Brightking (Yageo)
- Product Type: Thyristor Surge Suppressors (TSS)
- Package Type: DO-214AA/SMB
- MSL Rating: Level 1 (per J-STD-020)
- Certifications: GR 1089, ITU K.20, K.21, K.45, IEC 60950, UL 60950, TIA-968
Technical Specifications
| Part Number | VDRM (V) | VS (V) | VT (V) | IDRM (A) | IS (mA) | IT (A) | IH (mA) | CO (pF) | VPP 10/700s (V) | IPP 10/1000s (A) | VC @ VPP (V) | Marking |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AG-BK 6 | 25 | 4 | 5 | 800 | 2.2 | 50 | 125 | 6000 | 90 | 25 | 6 | AG |
Electrical Parameters Definition
- VDRM: Peak Off-state Voltage maximum voltage that can be applied while maintaining off state.
- VS: Switching Voltage maximum voltage prior to switching to on state.
- VT: On-state Voltage maximum voltage measured at rated on-state current.
- IDRM: Leakage Current maximum peak off-state current measured at VDRM.
- IS: Switching Current maximum current required to switch to on state.
- IT: On-state Current maximum rated continuous on-state current.
- IH: Holding Current typical current required to maintain on state.
- CO: Off-state Capacitance typical capacitance measured in off state (at 1 MHz with a 2V bias).
- VPP: Peak Pulse Voltage maximum rated peak impulse voltage.
- IPP: Peak Pulse Current maximum rated peak impulse current.
- VC: Clamping Voltage maximum voltage measured at VPP.
Thermal Considerations
| Symbol | Parameter | Value | Unit |
|---|---|---|---|
| TJ | Operating Junction Temperature | -40 to +125 | |
| TS | Storage Temperature Range | -40 to +150 | |
| RJA | Junction to Ambient on printed circuit | 90 | /W |
Dimensions (SMB/DO-214AA)
| Symbol | Millimeters | Inches | ||
|---|---|---|---|---|
| Min. | Max. | Min. | Max. | |
| L | 4.06 | 4.57 | 0.160 | 0.180 |
| D | 3.30 | 3.94 | 0.130 | 0.155 |
| D1 | 1.95 | 2.20 | 0.077 | 0.086 |
| T | 5.21 | 5.59 | 0.205 | 0.220 |
| T1 | 0.76 | 1.52 | 0.030 | 0.060 |
| d | - | 0.16 | - | 0.006 |
| H | 2.13 | 2.47 | 0.084 | 0.097 |
| t | 0.152 | 0.305 | 0.006 | 0.012 |
Packaging (Tape & Reel)
| Symbol | Dimension (mm) |
|---|---|
| W | 12.000.20 |
| P0 | 4.000.10 |
| P1 | 8.000.10 |
| P2 | 2.000.10 |
| D0 | 1.550.10 |
| D1 | 1.50.10 |
| E | 1.750.10 |
| F | 5.500.10 |
| A0 | 3.860.15 |
| B0 | 5.650.10 |
| K0 | 2.750.15 |
| T | 0.250.05 |
| D2 | 330.02.0 |
| D3 | 13.50.5 |
| H | 2.50.5 |
| W1 | 16.01.0 |
| Quantity | 3000PCS |
Recommended Soldering Conditions (Pb-Free Assembly)
| Profile Feature | Value | Unit |
|---|---|---|
| Average ramp-up rate (TL to TP) | 3 | /second max. |
| Preheat - Temperature Min (TS min) | 150 | |
| Preheat - Temperature Max (TS max) | 200 | |
| Preheat - Time (min to max) ( tS) | 60-180 | seconds |
| TS max to TL - Ramp-up Rate | 3 | /second max. |
| Time maintained above: - Temperature (TL) | 217 | |
| Time maintained above: - Time (tL) | 60-150 | seconds |
| Peak Temperature (TP) | 260 | |
| Time within 5 of actual Peak Temperature (tP) | 20-40 | seconds |
| Ramp-down Rate | 6 | /second max. |
| Time 25 to Peak Temperature | 8 | minutes max. |
Device Marking
- Code: AG XXXX (Internal control code)
- Logo: AG-BK
2410121341_Brightking-AG-BK_C2938676.pdf
Related Products
Surface Mount Schottky Bridge Rectifier YONGYUTAI MB14F with 40 Volt Reverse Voltage and 1 Amp Forward Current
Product OverviewThis MBF package Surface Mount Schottky Bridge rectifier offers a reverse voltage range of 40 to 200V and a forward current of 1A. It features high surge current capability and is designed for surface mount applications. Ideal for single-phase half-wave 60 Hz rectification with ...
Surface Mounted Rectifier ZHIDE US3M Series High Voltage 1000V Rectifier for Electronic Circuits
Product OverviewThe US3A-US3M series are surface-mounted high-efficiency rectifiers designed for general-purpose applications. They offer low reverse leakage, high forward surge capability, and high reliability, making them suitable for demanding environments. These rectifiers are guaranteed for ...
Silicon Bidirectional Trigger Diode YFW LLDB3 for Thyristor Phase Control Circuits Lamp Dimming and Speed Control
Product OverviewThe LL-34 LLDB3/LLDB4 are Silicon Bidirectional Trigger Diodes designed for thyristor phase control circuits. They are suitable for applications such as lamp-dimming, universal-motor speed controls, and heat controls.Product AttributesBrand: GuangDongYoufengMicroelectronicsCo,Ltd...
Power electronics IGBT YANGJIE MG150HF12TLC1 featuring trench technology and ultra fast soft recovery anti parallel FWD
Product OverviewThe MG150HF12TLC1 S-M409 is a high-performance IGBT module designed for demanding power electronics applications. It features low VCE(sat) with Trench technology, a positive temperature coefficient for VCE(sat), high short circuit capability, and an integrated ultra-fast & soft ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
