Durable IDCHIP ULN2803S Eight Channel Darlington Transistor Array for Relay and Stepper Motor Control

Key Attributes
Model Number: ULN2803S
Product Custom Attributes
Current - Collector(Ic):
500mA
Collector - Emitter Voltage VCEO:
15V
Mfr. Part #:
ULN2803S
Package:
SOP-18
Product Description

Product Overview

The ULN2803S is a high-current Darlington transistor array designed for low-voltage systems. It consists of eight Darlington pairs, each with a free-wheeling diode, suitable for driving inductive loads such as relays and stepper motors. Each Darlington pair supports a current of 200mA at an input voltage as low as 1.8V, with the capability to achieve higher output currents by paralleling the Darlington pairs. Each channel includes a base resistor and a 4.7K Ohm pull-down resistor to ground, allowing direct connection to TTL/CMOS circuits operating below 5V and preventing unstable MCU IO states during power-up.

Product Attributes

  • Brand: (IDCHIP)
  • Origin: (Shenzhen)
  • Model: ULN2803S
  • Package: SOP-18
  • Packaging: 2000/ (2000/Reel)

Technical Specifications

ParameterSymbolTest ConditionsMinTypicalMaxUnit
Absolute Maximum Ratings
Input VoltageVIN-0.57V
Collector-Emitter VoltageVCE-0.515V
COM Terminal VoltageVCOM15V
Collector Peak CurrentICPper channel500mA
Output Clamp Diode Peak Forward CurrentIOK500mA
Total Emitter Peak CurrentIET-2.0A
Storage TemperatureTS-60150
Junction TemperatureTJ150
Soldering TemperatureTL(within 10 seconds)260
Recommended Operating Conditions (TA=25 unless otherwise specified)
Operating TemperatureTopr-4085
Input Voltage (Output ON)VIN(ON)27V
Input Voltage (Output OFF)VIN(OFF)00.6V
Input Voltage (Control Signal)VIN07V
Collector-Emitter VoltageVCE012V
Clamp Diode Reverse VoltageVR18V
Clamp Diode Peak Forward CurrentIF350mA
Output CurrentIOUTTPW=25ms,TA=85,TJ=120,Duty=10%350mA/ch
TPW=25ms,TA=85,TJ=120,Duty=50%70mA/ch
Electrical Characteristics (TA=25 unless otherwise specified)
Input Voltage (Output ON)VIN(ON)VCE=1.5V,IC=250mA1.751.85V
Input CurrentIINVIN=3.3V,IC=250mA2.22.8mA
Collector-Emitter Saturation VoltageVCE(sat)VIN=1.8V,IC=250mA1.01.2V
Clamp Diode Forward VoltageVFIF=350mA1.41.6V
Clamp Diode Reverse CurrentIRVR=12V100A
Collector Cut-off Leakage CurrentICEXVCE=12V,IIN=050A
Input CapacitanceCIN15pF
Propagation Delay (Low-to-High)tPLHVL=5V,RL=450.151s
Propagation Delay (High-to-Low)tPHLVL=5V,RL=450.151s

2410081743_IDCHIP-ULN2803S_C41420014.pdf

Contact Our Experts And Get A Free Consultation!

Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.