Intelligent Power Module Jilin Sino-Microelectronics SPE05S60T-C for Small Power Motor Applications
Key Attributes
Model Number:
SPE05S60T-C
Product Custom Attributes
Mfr. Part #:
SPE05S60T-C
Package:
SOP23-FP
Product Description
Intelligent Power Module (IPM) - SPE05S60T-A/C
The SPE05S60T-A/C is an Intelligent Power Module (IPM) designed for small-power motor applications. It features compatibility with 3.3V and 5V MCUs, built-in bootstrap diode, undervoltage protection, and integrated temperature detection output. With an insulation withstand voltage of 1500V, this module is suitable for use in lampblack machines, fans, air purifiers, and dishwasher pumps.
Product Attributes
- Brand: Jilin Huarui Microelectronics Co., Ltd.
- Product Series: SPE05S60T-A/C
- Halogen-Free: Available in Tube and Reel
- Certifications: Not specified in text
- Material: Not specified in text
- Color: Not specified in text
Technical Specifications
| Parameter | Symbol | Condition | SPE05S60T-A/C | Unit |
| Inverter Part | ||||
| Collector emitter Voltage of Each IGBT | VCES | 600 | V | |
| Each IGBT Current, Continuous | IC | TC= 25C | 5 | A |
| Each IGBT Pulse Current, Peak | ICP | TC= 25C, Less than 1mS | 12 | A |
| Maximum Power Dissipation | PC | TC = 25C, Each IGBT | 23 | W |
| Junction Temperature | TJ | Note1 | -40~150 | C |
| Control Part | ||||
| Control Supply Voltage | VCC | Applied between VCC and COM | 20 | V |
| High-side Bias Voltage | VBS | Applied between VB and VS | 20 | V |
| Input Signal Voltage | VIN | Applied between VIN and COM | -0.5~VCC+0.5 | V |
| Bootstrap Diode Part | ||||
| Reverse Voltage | VRRMB | 600 | V | |
| Forward Current | IFB | TC=25 | 0.5 | A |
| Forward Current (Peak) | IFPB | TC=25, Less than 1mS | 1 | A |
| Total System | ||||
| Self-protecting power supply voltage limit | VPN(PROT) | VCC=VBS=13.5V~16.5V, TJ=125C, <2us | 400 | V |
| Module shell temperature | TC | -20~100 | ||
| Storage Temperature | TSTG | TC=25 | -40~125 | |
| Isolation Voltage | VISO | 60Hz, Sinusoidal, AC 1 min, between pins and heat-sink plate | 1500 | V |
| Electrical Characteristics (TJ=25, Unless Otherwise Specified) | ||||
| Inverter Part | ||||
| Collector - emitter saturation voltage | VCE(SAT) | VD=VDB=15V, VIN=5V, IC=5A, TJ=25C | -1.95 | V |
| FRD Forward voltage | VEC | VIN= 0V, IC=-5A | -1.6~2.0 | V |
| Collector emitter leakage current | ICES | VCE=VCES, TJ=25C | -7.5 | uA |
| Switching Times (Turn-on) | tON | VPN= 300 V, VD= VDB= 15 V, IC=5 A | 800 | nS |
| Switching Times (Turn-off) | tOFF | VIN= 0 V 5 V, Inductive Load | 500 | nS |
| Turn-on loss | Eon | IC = 5AVCC = 400VVD = VDB = 15VL=1mHTj= 25C | 42~92 | uJ |
| Turn-off loss | Eoff | IC = 5AVCC = 400VVD = VDB = 15VL=1mHTj= 25C | 90~142 | uJ |
| Control Part | ||||
| Quiescent VCC Supply Current | IQCC | VCC=15V, VIN=5V | 360~600 | uA |
| Quiescent VBS Supply Current | IQB | VDB=15V, VIN=5V | 64~120 | uA |
| Low-Side Under-Voltage Protection Detection Level | UVCCD | 7.2~9.2 | V | |
| Low-Side Under-Voltage Protection Reset Level | UVCCR | 8.0~9.8 | V | |
| High-Side Under-Voltage Protection Detection Level | UVBSD | 7.2~9.2 | V | |
| High-Side Under-Voltage Protection Reset Level | UVBSR | 8.0~9.8 | V | |
| HVIC Temperature Sensing Voltage Output | VTS | VCC=15V, THVIC=25 | 0.6~1.2 | V |
| Input ON Threshold Voltage | VIH | -2.9 | V | |
| Input OFF Threshold Voltage | VIL | 0.8 | V | |
| Bootstrap Diode Part | ||||
| Forward voltage | VFB | IF= 0.1 A, TC= 25C | -4.5 | V |
| Reverse recovery time | trrB | IF= 0.1 A, TC=25C | 80 | ns |
| Recommended Operating Conditions | ||||
| Supply Voltage | VPN | Between P and N | 300~400 | V |
| Control Supply Voltage | VCC | Between VCC and COM | 13.5~16.5 | V |
| High-Side Bias Voltage | VBS | Between VB and VS | 13.5~16.5 | V |
| Input ON Threshold Voltage | VIN(ON) | Between VIN and COM | 2.8~VCC | V |
| Input OFF Threshold Voltage | VIN(OFF) | 0~0.6 | V | |
| Blanking Time for Preventing Arm-Short | tded | VCC = VBS = 13.5 ~ 16.5 V, Tj 150C | 1.0 | us |
| PWM Switching Frequency | FPWM | Tj 150C | -20 | KHz |
2409280232_Jilin-Sino-Microelectronics-SPE05S60T-C_C6917303.pdf
Related Products
Power electronics IGBT YANGJIE MG150HF12TLC1 featuring trench technology and ultra fast soft recovery anti parallel FWD
Product OverviewThe MG150HF12TLC1 S-M409 is a high-performance IGBT module designed for demanding power electronics applications. It features low VCE(sat) with Trench technology, a positive temperature coefficient for VCE(sat), high short circuit capability, and an integrated ultra-fast & soft ...
Glass passivated bridge rectifier YONGYUTAI KBP310G offering 3 amp forward current and molded plastic construction
GLASS PASSIVATED BRIDGE RECTIFIERSIdeal for printed circuit board applications, these bridge rectifiers offer reliable, low-cost construction utilizing molded plastic techniques. The plastic material has a UL flammability classification of 94V-0. They are rated for reverse voltages from 50 to 1000V ...
Surface mount digital transistor YANGJIE DTC114YE with built in resistors and RoHS compliant halogen free epoxy
Product OverviewThe DTC114YE is a digital transistor with built-in resistors, designed for surface mount applications and ideally suited for automatic insertion. It features a moisture sensitivity level of 1 and an epoxy that meets UL-94 V-0 flammability rating and is halogen-free. This product is ...
Durable YANGJIE MG450HF12TLC2 IGBT module featuring trench technology for motion control welding and UPS
Product OverviewThe MG450HF12TLC2 is a high-performance IGBT module designed for motion/servo control, high-frequency switching applications, UPS, and welding machines. It features low Vce(sat) with Trench technology, low switching losses (particularly Eoff), a positive temperature coefficient for ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
