Silicon Bridge Rectifier LGE GBU25M Providing 700 Volt Maximum RMS Voltage and Durable Construction
Silicon Bridge Rectifiers GBU25A-GBU25M
Ideal for printed circuit board applications, these silicon bridge rectifiers offer reliable, low-cost construction utilizing a molded plastic technique. The plastic material boasts a U/L flammability classification of 94V-O, and the mounting position is flexible (any). They are suitable for various power applications requiring efficient rectification.
Product Attributes
- Brand: LG (implied by lgesemi.com)
- Material: Molded Plastic (U/L flammability classification 94V-O)
- Certifications: U/L flammability classification 94V-O
- Origin: Not specified
- Color: Not specified
Technical Specifications
| Characteristic | Symbol | GBU25A | GBU25B | GBU25D | GBU25G | GBU25J | GBU25K | GBU25M | Units |
|---|---|---|---|---|---|---|---|---|---|
| Maximum recurrent peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | V |
| Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| Maximum average forward Output current @TC=100 | IF(AV) | 25 | A | ||||||
| Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load | IFSM | 300 | A | ||||||
| Typical junction capacitance per leg (note 3) | CJ | 211 | pF | ||||||
| Typical thermal resistance per leg (note 2) (note 1) | RJA | 7.0 | /W | ||||||
| Typical thermal resistance per leg (note 2) (note 1) | RJC | 2 | /W | ||||||
| Operating junction temperature range | TJ | - 55 ---- + 150 | |||||||
| Storage temperature range | TSTG | - 55 ---- + 150 | |||||||
| Maximum instantaneous forward voltage @12.5A | VF | 1.1 | V | ||||||
| Maximum reverse current @TA=25 at rated DC blocking voltage | IR | 5.0 | A | ||||||
| Maximum reverse current @TA=125 | IR | 500 | A | ||||||
| It Rating for fusing @Tj=25 | It | 9373 | AS | ||||||
Dimensions (GBU)
| Dim | Min | Max | Units |
|---|---|---|---|
| A | 22.00 | 22.40 | mm |
| B | 18.40 | 18.80 | mm |
| C | 3.40 | 3.95 | mm |
| C1 | 2.50 | 3.00 | mm |
| E | 0.40 | 0.60 | mm |
| F | 17.00 | min | mm |
| F1 | 1.70 | 2.30 | mm |
| I1 | 2.30 | 2.60 | mm |
| I2 | 0.95 | 1.25 | mm |
| K | 4.70 | 5.30 | mm |
| P | 1.9 typical | mm | |
Packaging
| Device | Package | Shipping |
|---|---|---|
| GBU25A-GBU25M | GBU | 500 Units/Box |
Notes:
1. Unit case mounted on 3.2x3.2x0.12" thick (6.2x8.2x0.3cm) AI. Plate.
2. Units mounted in free air, no heat sink on P.C.B., 0.5x0.5"(12x12mm) copper pads, 0.375"(9.5mm) lead length.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts.
Website: http://www.lgesemi.com
Email: lge@lgesemi.com
Revision: 20170701-P1
2410121934_LGE-GBU25M_C970328.pdf
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.