motor drive module AOS AIP3D05A060Q4N featuring 600 volt 5 amp trench shielded planar gate IGBT technology
Key Attributes
Model Number:
AIP3D05A060Q4N
Product Custom Attributes
Mfr. Part #:
AIP3D05A060Q4N
Product Description
AIP3D05A060Q4(N) Intelligent Power Module
The AIP3D05A060Q4(N) is a 3-phase inverter module designed for low-power motor drive applications. It features a 600V-5A Trench Shielded Planar Gate IGBT configuration, built-in bootstrap diodes with integrated current-limiting resistors, and comprehensive protection features including control supply under-voltage lockout (UVLO), controllable over-temperature protection (OT), temperature monitoring (VOT), short-circuit current protection (CSC), and a controllable fault out signal (VCF). The module offers an enable input functionality for shutting down low-side IGBTs and an input interface compatible with 3 and 5V logic, utilizing Schmitt trigger receiver circuits. With isolation ratings of 2000Vrms/min, this module is suitable for AC 100-240Vrms class low power motor drives, including washing machines, compressors, and fan motors.
Product Attributes
- Brand: AOS (Alpha & Omega Semiconductor)
- Product Series: AIP3D05A060Q4(N)
- Certifications: UL Recognized
- Compliance: RoHS compliant, AOS Green Products
Technical Specifications
| Parameter | Conditions | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| General Features | |||||
| Input Interface | 3 and 5V line, Schmitt trigger receiver circuit (Active high) | ||||
| Isolation Ratings | 2000 | Vrms/min | |||
| Inverter Ratings | |||||
| Supply Voltage (VPN) | Applied between P - NU,NV,NW | 0 | 400 | V | |
| Supply Voltage (VPN, surge) | Applied between P - NU,NV,NW | 500 | V | ||
| Collector-Emitter Voltage (VCES) | 600 | V | |||
| Output Phase Current (IC) | TC=25C, TJ<150C | 5 | A | ||
| Output Phase Current (IC) | TC=80C, TJ<150C | 3.5 | A | ||
| Output Peak Phase Current (IPK) | TC=25C, less than 1ms pulse width | 10 | A | ||
| Short Circuit Withstand Time (tSC) | VPN400V, TJ=150C, VDD=15V | 5 | s | ||
| Collector Dissipation (PC) | TC=25C, per chip | 23 | W | ||
| Operating Junction Temperature (TJ) | -40 | 150 | C | ||
| Control & Protection Ratings | |||||
| Control Supply Voltage (VDD) | Applied between VDD-COM | 25 | V | ||
| High-Side Control Bias Voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 25 | V | ||
| Input Voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) COM | VDD+0.3 | V | ||
| Fault Output Supply Voltage (VCF) | Applied between VCF-COM | COM+5.5 | V | ||
| Fault Output Current (ICF) | Sink current at VCF terminal | 1 | mA | ||
| Current Sensing Input Voltage (VSC) | Applied between CSC-COM | COM+5.5 | V | ||
| Temperature Output (VOT) | Applied between VOT-COM | COM+5.5 | V | ||
| Self Protection Supply Voltage Limit (VPN(PROT)) | VDD=13.5-16.5V, Inverter part TJ=150C, Non-repetitive, less than 2s | 400 | V | ||
| Module Case Operation Temperature (TC) | Measurement point of TC is provided in Figure 1 | -30 | 125 | C | |
| Storage Temperature (TSTG) | -40 | 150 | C | ||
| Electrical Characteristics | |||||
| Collector-Emitter Saturation Voltage (VCE(SAT)) | VDD=VDB=15V, VIN=5V, IC=2.5A, TJ=25C | 1.20 | 1.60 | V | |
| Collector-Emitter Saturation Voltage (VCE(SAT)) | IC=2.5A, TJ=125C | 1.25 | V | ||
| FWD Forward Voltage (VF) | VIN=0, IF=2.5A, TJ=25C | 1.45 | 1.95 | V | |
| Switching Times (tON) | VPN=300V, VDD=VDB=15V, IC=3.5A, TJ=25C, VIN=0V 5V, Inductive load | 0.30 | 1.10 | s | |
| Switching Times (tC(ON)) | 0.1 | 0.35 | s | ||
| Switching Times (tOFF) | 1.1 | 1.6 | s | ||
| Switching Times (tC(OFF)) | 0.10 | 0.30 | s | ||
| Switching Times (trr) | 0.10 | s | |||
| Collector-Emitter Leakage Current (ICES) | VCE=VCES, TJ=25C | 1 | mA | ||
| Collector-Emitter Leakage Current (ICES) | VCE=VCES, TJ=125C | 10 | mA | ||
| Quiescent VDD Supply Current (IQDD) | VDD=15V, IN(UH,VH,WH,UL,VL,WL) =0V | 2.1 | mA | ||
| Quiescent VDB Supply Current (IQDB) | VDB=15V, IN(UH, VH, WH)=0V | 0.3 | mA | ||
| Short-Circuit Trip Level (VSC(ref)) | VDD=15V | 0.455 | 0.48 | 0.505 | V |
| Under-Voltage Protection Trip Level (UVDT) | 10.3 | 11.4 | 12.5 | V | |
| Under-Voltage Protection Reset Level (UVDR) | 10.8 | 11.9 | 13.0 | V | |
| Under-Voltage Protection Trip Level (UVDBT) | 8.5 | 9.5 | 10.5 | V | |
| Under-Voltage Protection Reset Level (UVDBR) | 9.5 | 10.5 | 11.5 | V | |
| Temperature Output (VOT) | LVIC Temperature=90C | 2.67 | 2.77 | 2.86 | V |
| Temperature Output (VOT) | LVIC Temperature=25C | 0.8 | 1.05 | 1.3 | V |
| Over-Temperature Protection Trip Level (OTT) | OT Pin connected to VDD or open | 100 | 120 | 140 | C |
| Hysteresis of Trip Reset (OTHYS) | 30 | C | |||
| Fault Output Voltage (VCFH) | VSC=0V, VCF Circuit: 10k to 5V pull-up | 4.9 | V | ||
| Fault Output Voltage (VCFL) | VSC=1V, VCF Circuit: 10k to 5V pull-up | 0.5 | V | ||
| Fault Output Positive Going Threshold (VCF+) | 1.9 | 2.2 | V | ||
| Fault Output Negative Going Threshold (VCF-) | 0.8 | 1.1 | V | ||
| Fault Output Pulse Width (tFO) | Pull-up resistor only | 20 | s | ||
| Fault Output Pulse Width (tFO) | Pull-up resistor with pull-down capacitor (RCF=2.2M, CCF=1nF, 5V pull-up) | 1 | ms | ||
| Input Current (IIN) | VIN=5V | 0.72 | mA | ||
| ON Threshold Voltage (Vth(on)) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL)-COM | 2.3 | 2.6 | V | |
| OFF Threshold Voltage (Vth(off)) | 0.8 | 1.2 | V | ||
| ON/OFF Threshold Hysteresis Voltage (Vth(hys)) | 1.1 | V | |||
| Bootstrap Diode Forward Voltage (VF(BSD)) | IF=10mA, Including Voltage Drop by Limiting Resistor | 0.5 | 1.0 | 1.5 | V |
| Built-in Limiting Resistance (RBSD) | Included in Bootstrap Diode | 80 | 100 | 120 | |
| Recommended Operation Conditions | |||||
| Supply Voltage (VPN) | Applied between P-NU, NV, NW | 0 | 400 | V | |
| Control Supply Voltage (VDD) | Applied between VDD-COM | 13.5 | 15.0 | 16.5 | V |
| High-Side Bias Voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 13.5 | 15.0 | 18.5 | V |
| Control Supply Variation (dVDD/dt, dVDB/dt) | -1 | +1 | V/s | ||
| Arm Shoot-Through Blocking Time (tdead) | For each input signal | 1.5 | s | ||
| PWM Input Frequency (fPWM) | -40C < TJ < 150C | 20 | kHz | ||
| Minimum Input Pulse Width (PWIN(ON)) | 0.5 | s | |||
| Minimum Input Pulse Width (PWIN(OFF)) | 0.5 | s | |||
| COM Variation | Between COM-NU, NV, NW (including surge) | -5.0 | 5.0 | V | |
| Mechanical Characteristics | |||||
| Mounting Torque | Mounting Screw: M3 | 0.59 | 0.69 | 0.78 | N m |
| Weight | 9.12 | g | |||
| Flatness | Refer to Figure 6 | -50 | 100 | m | |
| Thermal Resistance | |||||
| Junction to Case (Rth(j-c)Q) | Inverter IGBT (per 1/6 module) | 5.4 | K/W | ||
| Junction to Case (Rth(j-c)F) | Inverter FWD (per 1/6 module) | 8.0 | K/W | ||
| Ordering Information | |||||
| Part Number | Temperature Range | Package | Terminal type | ||
| AIP3D05A060Q4 | -40C to 150C | IPM-3 Long | |||
| AIP3D05A060Q4N | -40C to 150C | IPM-3A Normal | |||
2411181756_AOS-AIP3D05A060Q4N_C20266156.pdf
Related Products
Compact surface mount bridge rectifier YONGYUTAI DB157S with plated solderable leads and ABS housing
Product OverviewThis series of bridge rectifiers features glass passivated die construction, offering a low forward voltage drop and high current/surge current capabilities. Designed for surface mount applications, these rectifiers are constructed from UL 94V-0 rated plastic material. They are ...
Surface Mount Schottky Bridge Rectifier YONGYUTAI MB14F with 40 Volt Reverse Voltage and 1 Amp Forward Current
Product OverviewThis MBF package Surface Mount Schottky Bridge rectifier offers a reverse voltage range of 40 to 200V and a forward current of 1A. It features high surge current capability and is designed for surface mount applications. Ideal for single-phase half-wave 60 Hz rectification with ...
Surface mount digital transistor YANGJIE DTC114YE with built in resistors and RoHS compliant halogen free epoxy
Product OverviewThe DTC114YE is a digital transistor with built-in resistors, designed for surface mount applications and ideally suited for automatic insertion. It features a moisture sensitivity level of 1 and an epoxy that meets UL-94 V-0 flammability rating and is halogen-free. This product is ...
Silicon Carbide Schottky Barrier Diode Wolfspeed E4D20120A 1200 Volt 20 Amp Automotive Grade Device
Product Overview This 4th Generation 1200 V, 20 A Silicon Carbide (SiC) Schottky Barrier diode, designated E4D20120A, offers significant performance advantages over silicon-based solutions. Power electronics systems can achieve higher efficiency standards, reach higher frequencies, and attain ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
