3 phase inverter intelligent power module AOS AIP3D10A060Q6 with 600 volt 10 amp trench shielded planar gate IGBT
Key Attributes
Model Number:
AIP3D10A060Q6
Product Custom Attributes
Mfr. Part #:
AIP3D10A060Q6
Product Description
Product Overview
The AIP3D10A060Q6(N) is a 3-phase inverter intelligent power module designed for low power motor drive applications. It features a 600V-10A Trench Shielded Planar Gate IGBT, built-in bootstrap diodes with integrated current-limiting resistors, and comprehensive protection functions including control supply under-voltage lockout (UVLO), controllable over-temperature protection (OT), temperature monitoring (VOT), and short-circuit current protection (CSC). The module offers a controllable fault out signal (VCF) and an enable input functionality. With an isolation rating of 2000Vrms/min, it is suitable for AC 100-240Vrms class low power motor drives, such as washing machines, compressors, and fan motors.
Product Attributes
- Brand: AOS (Alpha & Omega Semiconductor)
- Certifications: UL Recognized
- Compliance: RoHS compliant, AOS Green Products (reduced levels of Halogens)
- Package Type: Dual-In-Line Package (IPM-3 Long Terminal Type, IPM-3A Normal Terminal Type)
Technical Specifications
| Model | External View Size | Voltage Rating | Current Rating | Temperature Range | Isolation Voltage | Features |
|---|---|---|---|---|---|---|
| AIP3D10A060Q6(N) | 38 x 24 x 3.6 mm | 600V | 10A | -40C to 150C | 2000Vrms/min | UL Recognized, 3-phase inverter module, Built-in bootstrap diodes with integrated current-limiting resistor, Control supply under-voltage lockout protection (UVLO), Controllable over-temperature protection (OT), Temperature monitoring (VOT), Short-circuit current protection (CSC), Controllable fault out signal (VCF), Enable input functionality, Input interface: 3 and 5V line, Schmitt trigger receiver circuit (Active high) |
Detailed Technical Specifications
| Parameter | Conditions | Min. | Typ. | Max. | Units |
|---|---|---|---|---|---|
| Absolute Maximum Ratings | |||||
| Inverter Supply Voltage (VPN) | Applied between P - NU,NV,NW | 450 | V | ||
| Inverter Supply Voltage (surge) (VPN(surge)) | Applied between P - NU,NV,NW | 500 | V | ||
| Collector-Emitter Voltage (VCES) | 600 | V | |||
| Output Phase Current (IC) | TC=25C, TJ<150C | 10 | A | ||
| Output Phase Current (IC) | TC=80C, TJ<150C | 5 | A | ||
| Output Peak Phase Current (IPK) | TC=25C, less than 1ms pulse width | 20 | A | ||
| Short Circuit Withstand Time (tSC) | VPN400V, TJ=150C, VDD=15V | 5 | s | ||
| Collector Dissipation (PC) | TC=25C, per chip | 25 | W | ||
| Operating Junction Temperature (TJ) | -40 | 150 | C | ||
| Control Supply Voltage (VDD) | Applied between VDD-COM | 25 | V | ||
| High-Side Control Bias Voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 25 | V | ||
| Input Voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) COM | VDD+0.3 | V | ||
| Fault Output Supply Voltage (VCF) | Applied between VCF-COM | COM+5.5 | V | ||
| Fault Output Current (ICF) | Sink current at VCF terminal | 1 | mA | ||
| Current Sensing Input Voltage (VSC) | Applied between CSC-COM | COM+5.5 | V | ||
| Temperature Output (VOT) | Applied between VOT-COM | COM+5.5 | V | ||
| Self Protection Supply Voltage Limit (VPN(PROT)) | VDD=13.5-16.5V, Inverter part TJ=150C, Non-repetitive, less than 2s | 400 | V | ||
| Module Case Operation Temperature (TC) | Measurement point of TC is provided in Figure 1 | -30 | 125 | C | |
| Storage Temperature (TSTG) | -40 | 150 | C | ||
| Isolation Voltage (VISO) | 60Hz, sinusoidal, AC 1min, between connected all pins and heat sink plate | 2000 | Vrms | ||
| Thermal Resistance | |||||
| Junction to Case (Rth(j-c)Q) | Inverter IGBT (per 1/6 module) | - | - | 4.95 | K/W |
| Junction to Case (Rth(j-c)F) | Inverter FWD (per 1/6 module) | - | - | 7.45 | K/W |
| Electrical Characteristics | |||||
| Collector-Emitter Saturation Voltage (VCE(SAT)) | VDD=VDB=15V, VIN=5V, IC=5A, TJ=25C | - | 1.60 | 2.10 | V |
| Collector-Emitter Saturation Voltage (VCE(SAT)) | VDD=VDB=15V, VIN=5V, IC=5A, TJ=125C | - | 1.90 | - | V |
| FWD Forward Voltage (VF) | VIN=0, IF=5A, TJ=25C | - | 1.80 | 2.30 | V |
| Switching Times (tON) | VPN=300V, VDD=VDB=15V, IC=5A, TJ=25C, VIN=0V 5V, Inductive load | 0.30 | 0.60 | 1.10 | s |
| Switching Times (tC(ON)) | - | 0.1 | 0.35 | s | |
| Switching Times (tOFF) | - | 1.1 | 1.6 | s | |
| Switching Times (tC(OFF)) | - | 0.10 | 0.30 | s | |
| Switching Times (trr) | - | 0.10 | - | s | |
| Collector-Emitter Leakage Current (ICES) | VCE=VCES, TJ=25C | - | - | 1 | mA |
| Collector-Emitter Leakage Current (ICES) | VCE=VCES, TJ=125C | - | - | 10 | mA |
| Quiescent VDD Supply Current (IQDD) | VDD=15V, IN(UH,VH,WH,UL,VL,WL) =0V | - | - | 2.1 | mA |
| Quiescent VDB Supply Current (IQDB) | VDB=15V, IN(UH, VH, WH)=0V | - | - | 0.3 | mA |
| Short-Circuit Trip Level (VSC(ref)) | VDD=15V | 0.455 | 0.48 | 0.505 | V |
| Under-Voltage Protection Trip Level (UVDT) | 10.3 | 11.4 | 12.5 | V | |
| Under-Voltage Reset Level (UVDR) | 10.8 | 11.9 | 13.0 | V | |
| Under-Voltage Bias Trip Level (UVDBT) | 8.5 | 9.5 | 10.5 | V | |
| Under-Voltage Bias Reset Level (UVDBR) | 9.5 | 10.5 | 11.5 | V | |
| Temperature Output (VOT) | LVIC Temperature=90C | 2.67 | 2.77 | 2.86 | V |
| Temperature Output (VOT) | LVIC Temperature=25C | 0.8 | 1.05 | 1.3 | V |
| Over-Temperature Protection Trip Level (OTT) | OT Pin connected to VDD or open | 100 | 120 | 140 | C |
| Hysteresis of Trip Reset (OTHYS) | - | 30 | - | C | |
| Fault Output Voltage (VCFH) | VSC=0V, VCF Circuit: 10k to 5V pull-up | 4.9 | - | - | V |
| Fault Output Voltage (VCFL) | VSC=1V, VCF Circuit: 10k to 5V pull-up | - | - | 0.5 | V |
| Fault Output Positive Going Threshold (VCF+) | - | 1.9 | 2.2 | V | |
| Fault Output Negative Going Threshold (VCF-) | 0.8 | 1.1 | - | V | |
| Fault Output Pulse Width (tFO) | Pull-up resistor only | 20 | - | - | s |
| Fault Output Pulse Width (tFO) | Pull-up resistor with pull-down capacitor (RCF=2.2M, CCF=1nF, 5V pull-up) (Figure 5) | - | 1 | - | ms |
| Input Current (IIN) | VIN=5V | - | 0.72 | - | mA |
| ON Threshold Voltage (Vth(on)) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL)-COM | 2.3 | 2.6 | - | V |
| OFF Threshold Voltage (Vth(off)) | 0.8 | 1.2 | - | V | |
| ON/OFF Threshold Hysteresis Voltage (Vth(hys)) | - | 1.1 | - | V | |
| Bootstrap Diode Forward Voltage (VF(BSD)) | IF=10mA, Including Voltage Drop by Limiting Resistor | 0.5 | 1.0 | 1.5 | V |
| Built-in Limiting Resistance (RBSD) | Included in Bootstrap Diode | 80 | 100 | 120 | |
| Recommended Operation Conditions | |||||
| Supply Voltage (VPN) | Applied between P-NU, NV, NW | 0 | 300 | 400 | V |
| Control Supply Voltage (VDD) | Applied between VDD-COM | 13.5 | 15.0 | 16.5 | V |
| High-Side Bias Voltage (VDB) | Applied between VB(U)-U, VB(V)-V, VB(W)-W | 13.5 | 15.0 | 18.5 | V |
| Control Supply Variation (dVDD/dt, dVDB/dt) | -1 | - | +1 | V/s | |
| Arm Shoot-Through Blocking Time (tdead) | For each input signal | 1.5 | - | - | s |
| PWM Input Frequency (fPWM) | -40C < TJ < 150C | - | - | 20 | kHz |
| Minimum Input Pulse Width (PWIN(ON)) | 0.5 | - | - | s | |
| Minimum Input Pulse Width (PWIN(OFF)) | 0.5 | - | - | s | |
| COM Variation | Between COM-NU, NV, NW (including surge) | -5.0 | - | 5.0 | V |
2411041634_AOS-AIP3D10A060Q6_C20266159.pdf
Related Products
Small signal Zener diode YANGJIE MMSZ5229BQ epoxy UL94 V0 flammability rating with tin leads
Product OverviewThe MMSZ5221BQ THRU MMSZ5261BQ series are small signal Zener diodes designed for general regulation functions. These diodes feature epoxy that meets UL-94 V-0 flammability rating and is halogen-free, with a Moisture Sensitivity Level 1. They offer Zener voltages ranging from 2.4V to ...
Planar Die Zener Diode Series Including XZT BZT52C18S Suitable for Medium Current Applications
Product OverviewThe BZT52C2V4S thru BZT52C43S series are planar die construction Zener diodes designed for general purpose, medium current applications. They are ideally suited for automated assembly processes and are available in lead-free versions. These diodes offer a wide range of Zener voltages ...
Silicon Bidirectional Trigger Diode YFW LLDB3 for Thyristor Phase Control Circuits Lamp Dimming and Speed Control
Product OverviewThe LL-34 LLDB3/LLDB4 are Silicon Bidirectional Trigger Diodes designed for thyristor phase control circuits. They are suitable for applications such as lamp-dimming, universal-motor speed controls, and heat controls.Product AttributesBrand: GuangDongYoufengMicroelectronicsCo,Ltd...
YANGJIE MG400HF12MIC2 IGBT module featuring fast switching speeds and low stray inductance for power supplies
Product OverviewThe MG400HF12MIC2 is a high-power IGBT module designed for demanding applications. It features short circuit rating, low stray inductance, and low switching losses, with a VCE(sat) exhibiting a positive temperature coefficient for enhanced reliability. The module offers fast ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
