surface mount rectifier Changzhou Starsea Elec ES1G with low reverse leakage and fast switching

Product Overview

The ES1A through ES1J series are surface mount super-fast rectifiers designed for high-efficiency applications. Featuring fast switching speeds, low reverse leakage, and high forward surge current capability, these rectifiers are ideal for automated placement due to their built-in strain relief. They are suitable for surface-mounted applications and can withstand high-temperature soldering.

Product Attributes

• Case: JEDEC DO-214AC molded plastic body
• Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
• Polarity: Color band denotes cathode end
• Mounting Position: Any
• Flammability Classification: UL 94V-0

Technical Specifications

Note:
1. Reverse recovery condition IF=0.5A, IR=1.0A, Irr=0.25A.
2. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
3. P.C.B. mounted with 0.2x0.2 (5.0x5.0mm) copper pad areas.

Maximum Ratings and Electrical Characteristics (Ratings at 25 C ambient temperature unless otherwise specified)

General Notes: Single phase half wave 60Hz, resistive or inductive load. For capacitive load current derate by 20%.

Dimensions (in inches and millimeters):

DO-214AC
Length: 0.173(4.40) to 0.150(3.80)
Width: 0.114(2.90) to 0.090(2.30)
Height: 0.209(5.30) to 0.185(4.70)
Lead Width: 0.100(2.55) to 0.076(1.95)
Lead Thickness: 0.067(1.70) to 0.043(1.10)
Body Thickness: 0.063(1.60) to 0.029(0.75)
Lead Length: 0.008(0.20) to 0.002(0.05)
Pad Area: 0.016(0.41) to 0.006(0.15)