600 volt 35 amp Fuji Electric 6MBP35XSF060-50 igbt module with temperature sensor output and fault signal output
Key Attributes
Model Number:
6MBP35XSF060-50
Product Custom Attributes
Td(off):
1.15us
Pd - Power Dissipation:
79.1W
Td(on):
800ns
Collector-Emitter Breakdown Voltage (Vces):
600V
IGBT Type:
IGBT Module
Operating Temperature:
-30℃~+150℃
Pulsed Current- Forward(Ifm):
70A
Reverse Recovery Time(trr):
200ns
Mfr. Part #:
6MBP35XSF060-50
Product Description
6MBP35XSF060-50 IGBT Module (X series)
The 6MBP35XSF060-50 is a 600V / 35A IGBT Module from the X series, designed for three-phase inverter drives. It features separate emitter types for low-side IGBTs, short circuit protection, temperature sensor output, under-voltage protection, and a fault signal output. The input interface supports TTL (3.3V/5V) with active high logic. This module is ideal for AC motor drives in small power applications, including air conditioners, heat pumps, fans, and ventilators operating within the AC 100-240V range.
Product Attributes
- Brand: Fuji Electric (implied by datasheet format)
- Series: X series
- Protection Features: Short circuit protection, Temperature sensor output, Under voltage protection, Fault signal output
- Input Interface: TTL (3.3V/5V), Active high logic
Technical Specifications
| Item | Symbol | Conditions | min. | typ. | max. | Unit |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings | V CE(chip) | T C=25, per single FWD | - | - | 600 | V |
| I C | T C=25, per single IGBT | - | - | 35 | A | |
| I CP | T C=25, per single IGBT | - | - | 70 | A | |
| V B(*) | Applied between VCCH-COM | - | - | 20 | V | |
| V CCL | Applied between VCCL-COM | - | - | 20 | V | |
| V isol | t = 1min, Note*7 | - | - | 1500 | Vrms | |
| T vj | Operating virtual junction temperature | -40 | - | 150 | C | |
| T C | Operating case temperature | -40 | - | 125 | C | |
| T stg | Storage temperature | -40 | - | 125 | C | |
| P D_IGBT | T C=25, per single IGBT | - | - | 39.6 | W | |
| P D_FWD | T C=25, per single FWD | - | - | 7.2 | W | |
| Electrical Characteristics (Inverter Block) | V CE(sat) | I C = 35A, T vj = 125C | - | 1.40 | - | V |
| t d(on) | I C=35A, T vj=125C | - | 0.80 | - | s | |
| t r | I C=35A, T vj=125C | - | 0.95 | - | s | |
| t d(off) | I C=35A, T vj=125C | - | 1.15 | - | s | |
| t f | I C=35A, T vj=125C | - | 1.35 | - | s | |
| t rr | I F=35A, T vj=125C | - | 1.70 | - | s | |
| V F | T vj=25C | - | 0.80 | - | V | |
| V F | T vj=125C | - | 1.00 | - | V | |
| I C | Zero gate voltage collector current | - | - | 0.50 | mA | |
| I CE | Zero gate voltage collector current | - | - | 1.00 | mA | |
| Electrical Characteristics (Control Circuit Block) | V IN | Input signal voltage | -0.5 | - | 20 | V |
| I IN | Input signal current | - | - | 20 | mA | |
| V FO(L) | Fault output voltage | -0.5 | - | 2.0 | V | |
| V FO(H) | Fault output voltage | 8.8 | - | 10.8 | V | |
| V th(hys) | Input signal threshold hysteresis voltage | 0.5 | - | - | V | |
| t IN(ON) | Operational input pulse width of turn-on | 0.7 | - | - | s | |
| t IN(OFF) | Operational input pulse width of turn-off | 1.0 | - | - | s | |
| I CCHB | Circuit current of bootstrap circuit (per one unit) | - | 1.25 | 1.9 | mA | |
| I CCH | Circuit current of high-side | - | 0.6 | 0.9 | mA | |
| I CCL | Circuit current of low-side | - | 0.6 | 0.9 | mA | |
| Electrical Characteristics (Control Circuit Block Continued) | V IS(ref) | Voltage for current sensing | - | 0.5 | - | V |
| t d(IS) | Over current protection delay time | - | 0.3 | 1.3 | s | |
| V CCL(ON) | V CC under voltage reset level of low-side | 10.8 | - | 13.0 | V | |
| V CCL(OFF) | V CC under voltage trip level of low-side | 8.3 | - | 10.3 | V | |
| V CCH(ON) | V CC under voltage reset level of high-side | 10.0 | - | 12.0 | V | |
| V CCH(OFF) | V CC under voltage trip level of high-side | 8.3 | - | 10.3 | V | |
| V B(ON) | V B under voltage reset level | 10.5 | - | 12.5 | V | |
| V B(OFF) | V B under voltage trip level | 8.8 | - | 10.8 | V | |
| Thermal Characteristics | R th(j-c)_IGBT | Junction to case thermal resistance (per single IGBT) | - | - | 1.58 | /W |
| R th(j-c)_FWD | Junction to case thermal resistance (per single FWD) | - | - | 3.16 | /W | |
| Mechanical Characteristics | Mounting torque of screws | M3 | - | - | 0.59 - 0.98 | Nm |
| Weight | - | - | - | 6 | g | |
| Recommended Operation Conditions | V DC | DC bus voltage | - | - | 400 | V |
| V B(*) | High-side bias voltage for IGBT gate driving | 13.5 | 15.0 | 18.5 | V | |
| V CCH | High-side supply voltage | 13.5 | 15.0 | 16.5 | V | |
| V CCL | Low-side supply voltage | 13.5 | 15.0 | 16.5 | V | |
| t DEAD | Dead time for preventing arm-short | 1.0 | - | - | s | |
| f PWM | PWM input frequency | - | - | 20 | kHz | |
| T vjop | Operating virtual junction temperature | - | - | 150 | C |
2410121955_Fuji-Electric-6MBP35XSF060-50_C22470718.pdf
Related Products
High Reliability Surface Mounted Rectifier ZHIDE SS510A Molded Plastic Epoxy UL 94V 0 Flame Retardant
Product OverviewThe SS52A-SS520A series are surface-mounted Schottky barrier rectifiers designed for high-reliability applications. They offer low reverse leakage, high forward surge capability, and are guaranteed for high-temperature soldering. These rectifiers are compliant with RoHS standards, ...
Robust industrial IGBT module YANGJIE MG50HF12TLC1 with low VCEsat and high short circuit capability
Product OverviewThe MG50HF12TLC1 S-M392 is a high-performance IGBT module designed for inverter applications, AC/DC servo drive amplifiers, UPS systems, and soft switching welding machines. It features low VCE(sat) with Trench technology, a positive temperature coefficient for VCE(sat), high short ...
High speed switching transistor YANGJIE DGP15N65CTL designed for hard and soft switching applications
Product OverviewThe DGP15N65CTL0 is a high-speed smooth switching IGBT discrete device designed for hard and soft switching applications. It features a maximum junction temperature of 175, a positive temperature coefficient, and high ruggedness with temperature stability. This IGBT is suitable for ...
Small Signal Zener Diodes Including YANGJIE BZX584C3V9Q for General Purpose Voltage Regulation
Small Signal Zener DiodesThe BZX584C2V4Q thru BZX584C47VQ series are small signal Zener diodes designed for general regulation functions. These diodes feature an epoxy casing that meets UL-94 V-0 flammability rating and is halogen-free. They are moisture sensitivity level 1 and AEC-Q101 qualified ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
