variable frequency drive module Hangzhou Silan Microelectronics SDM20G60FC8 with built in six low loss IGBTs
Key Attributes
Model Number:
SDM20G60FC8
Product Custom Attributes
High-side Bias Voltage(Vbs):
13.5V~16.5V
Configuration:
Three-phase Bridge
Operating Temperature:
-40℃~+150℃
Voltage - Isolation:
1500Vrms
Frequency - Switching:
20kHz
Mfr. Part #:
SDM20G60FC8
Package:
DIP-24HL
Product Description
SDM20G60FC8 (IPM)
Product Overview
The SDM20G60FC8 is a highly integrated and reliable three-phase brushless DC motor drive circuit, primarily used in low-power variable frequency drives. It features a built-in 3-phase full-bridge high-voltage gate driver circuit and six low-loss IGBTs. The module includes various protection functions such as undervoltage and short-circuit, offering excellent protection and a wide safe operating area. Independent negative DC terminals for each phase allow for individual current detection. Its high insulation and easy heat dissipation design result in a compact package, making it convenient for applications requiring compact installation.
Product Attributes
- Brand: (Silan Microelectronics)
- Origin: (Hangzhou)
- Environmental Level: (Halogen-free)
- Packaging: (Tape & Reel)
Technical Specifications
| Parameter | Symbol | Range | Unit | |||
| Inverter Section | ||||||
| DC Bus Voltage between P and N | VPN | 450 | V | |||
| DC Bus Voltage between P and N (Surge) | VPN(Surge) | 500 | V | |||
| Collector-Emitter Voltage | VCES | 600 | V | |||
| Continuous Collector Current per IGBT (TC=25C, Tj<150C) | IC | 20 | A | |||
| Peak Collector Current per IGBT (TC=25C, Pulse Width < 1ms) | ICP | 40 | A | |||
| Maximum Power Dissipation per Module Collector (TC=25C) | PC | 78 | W | |||
| Junction Temperature | TJ | -40~+150 | C | |||
| Control Section | ||||||
| Control Supply Voltage | VCC | 20 | V | |||
| High-side Control Voltage | VBS | 20 | V | |||
| Input Signal Voltage | VIN | -0.5~VCC+0.5 | V | |||
| Fault Output Supply Voltage | VFO | -0.5~VCC+0.5 | V | |||
| Fault Output Current (IFO Sink Current at VFO Terminal) | IFO | 8 | mA | |||
| Current Detection Terminal Input Voltage | VSC | -0.5~VCC+0.5 | V | |||
| Overall | ||||||
| Short Circuit Protection Trigger Voltage (VCC=VBS=13.5~16.5V, TJ=150C, Single event < 2s) | VPN(PROT) | 400 | V | |||
| Operating Case Temperature Range (-40C TJ 150C) | TC | -40~100 | C | |||
| Storage Temperature Range | TSTG | -40~125 | C | |||
| IGBT Junction-to-Case Thermal Resistance | RJCQ | 1.6 | C/W | |||
| FRD Junction-to-Case Thermal Resistance | RJCF | 2.1 | C/W | |||
| Insulation Voltage (60Hz, Sine Wave, 1 min, Pin to Heatsink) | VISO | 1500 | Vrms | |||
| Mounting Torque (Mounting Screw: M3, Recommended Value 0.62N.m) | T | 0.5~0.8 | N.m | |||
| Recommended Operating Conditions | ||||||
| Parameter | Symbol | Min. | Typ. | Max. | Unit | |
| Bus Voltage between P and N | VPN | -- | 300 | 400 | V | |
| Control Supply Voltage | VCC | 13.5 | 15 | 16.5 | V | |
| High-side Control Voltage | VBS | 13.5 | 15 | 18.5 | V | |
| Control Voltage Fluctuation | dVcc/dt, dVBS/dt | -1 | -- | 1 | V/s | |
| Dead Time to Prevent Bridge Shoot-through | Tdead | 1.0 | -- | -- | s | |
| Minimum Input Pulse Width | PWIN(ON), PWIN(OFF) | 0.7 | -- | -- | s | |
| PWM Switching Frequency | fPWM | -- | -- | 20 | kHz | |
| COM Variation (Between COM-Nu, Nv, Nw) | VCOM | -5 | -- | 5 | V | |
| Electrical Characteristics (Unless otherwise specified, Tamb=25C, VCC=VBS=15V) | ||||||
| Parameter | Symbol | Test Condition | Min. | Typ. | Max. | Unit |
| Inverter Section | ||||||
| Collector-Emitter Saturation Voltage | VCE(SAT) | VCC=VBS=15V, VIN=5V, IC=20A, TJ=25C | -- | 1.7 | 2.2 | V |
| FRD Forward Voltage | VF | VIN=0V, IF=20A, TJ=25C | -- | 1.7 | 2.2 | V |
| Switching Time (Turn-on) | tON | VPN=300V, VCC=VBS=15V, IC=20A, VIN=0V5V, Inductive Load | -- | 0.95 | -- | s |
| Switching Time (Turn-on Delay) | tC(ON) | -- | 0.3 | -- | s | |
| Switching Time (Turn-off) | tOFF | -- | 0.85 | -- | s | |
| Switching Time (Turn-off Delay) | tC(OFF) | -- | 0.15 | -- | s | |
| Reverse Recovery Time | trr | -- | 0.05 | -- | s | |
| Collector-Emitter Leakage Current | ICES | VCE=VCES | -- | -- | 1 | mA |
| Control Section | ||||||
| VCC Quiescent Current | IQCCN | VCC=15V, VIN=5V | -- | -- | 2.8 | mA |
| VCC Quiescent Current | IQCCF | VCC=15V, VIN=0V | -- | -- | 2.8 | mA |
| VBS Quiescent Current | IQBS | VBS=15V, VINH=0V | -- | -- | 100 | A |
| VBS Quiescent Current | IQBS | VBS=15V, VINH=5V | -- | -- | 125 | A |
| Fault Output Voltage (High) | VFOH | VSC=0V, 10k pull-up resistor to 5V at VFO | 4.9 | -- | -- | V |
| Fault Output Voltage (Low) | VFOL | VSC=1V, IFo=1mA | -- | -- | 0.95 | V |
| Fault Output Pulse Width | tFO | (Note 2) | 20 | -- | -- | s |
| Short Circuit Protection Trigger Voltage (Fig. 5) | VSC(ref) | VCC=15V (Note 3) | 0.455 | 0.48 | 0.505 | V |
| Temperature Output (Fig. 3) | VOT | LVIC Temperature=25C | 0.88 | 1.13 | 1.39 | V |
| Temperature Output (Fig. 3) | VOT | LVIC Temperature=90C | 2.63 | 2.77 | 2.91 | V |
| Undervoltage Protection (Low-side, Fig. 6) | UVCCD | VCC Detection Voltage | 10.5 | 11.5 | 12.5 | V |
| Undervoltage Protection Reset (Low-side, Fig. 6) | UVCCR | VCC Reset Voltage | 11.0 | 12.0 | 13.0 | V |
| Undervoltage Protection (High-side, Fig. 7) | UVBSD | VBS Detection Voltage | 10.0 | 11.0 | 12.0 | V |
| Undervoltage Protection Reset (High-side, Fig. 7) | UVBSR | VBS Reset Voltage | 10.5 | 11.5 | 12.5 | V |
| Input Current | IIN | VIN=5V | 0.7 | 1 | 1.5 | mA |
| Turn-on Threshold Voltage (Logic High) | VIH | Between Input and COM | -- | 2.1 | 2.6 | V |
| Turn-off Threshold Voltage (Logic Low) | VIL | Between Input and COM | 0.8 | 1.3 | -- | V |
| Bootstrap Diode Section (Applies to each bootstrap diode unless otherwise specified, TC=25C) | ||||||
| Parameter | Symbol | Test Condition | Min. | Typ. | Max. | Unit |
| Forward Voltage | VF | IF=100mA | -- | 3.0 | -- | V |
| Reverse Recovery Time | trr | IF=100mA | -- | 80 | -- | ns |
Applications
- Industrial Servo Drives
- Air Conditioner Compressors
- Low-Power Variable Frequency Drives
2511110935_Hangzhou-Silan-Microelectronics-SDM20G60FC8_C5123265.pdf
Related Products
power control Sensata B612F-2T-YEC module for AC DC variable voltage output applications up to 15KW
Sensata B-2T, B-2 Series Power Modules The Sensata B-2T and B-2 Series Power Modules offer versatile solutions for AC or DC variable voltage output applications, capable of handling up to 15KW. These modules feature eight circuit options and are UL Recognized (E72445), providing reliable performance ...
N Channel Enhancement Mode MOSFET YANGJIE YJG70G06A with Low RDS ON and Excellent Thermal Performance
Product OverviewThe YJG70G06A is an N-Channel Enhancement Mode Field Effect Transistor from Yangzhou Yangjie Electronic Technology Co., Ltd. Featuring Split Gate Trench MOSFET technology and a high-density cell design, it offers excellent package heat dissipation and low RDS(ON). It is suitable for ...
Silicon Bidirectional Trigger Diode YFW LLDB3 for Thyristor Phase Control Circuits Lamp Dimming and Speed Control
Product OverviewThe LL-34 LLDB3/LLDB4 are Silicon Bidirectional Trigger Diodes designed for thyristor phase control circuits. They are suitable for applications such as lamp-dimming, universal-motor speed controls, and heat controls.Product AttributesBrand: GuangDongYoufengMicroelectronicsCo,Ltd...
Power electronics IGBT YANGJIE MG150HF12TLC1 featuring trench technology and ultra fast soft recovery anti parallel FWD
Product OverviewThe MG150HF12TLC1 S-M409 is a high-performance IGBT module designed for demanding power electronics applications. It features low VCE(sat) with Trench technology, a positive temperature coefficient for VCE(sat), high short circuit capability, and an integrated ultra-fast & soft ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
