Single phase half wave rectifier Huixin D4KB100 with UL 94V 0 classification and solder plated terminals
Key Attributes
Model Number:
D4KB100
Product Custom Attributes
Non-Repetitive Peak Forward Surge Current:
120A
Operating Junction Temperature Range:
-55℃~+150℃
Voltage - Forward(Vf@If):
1.1V@4A
Current - Rectified:
4A
Voltage - DC Reverse(Vr):
1kV
Mfr. Part #:
D4KB100
Package:
D3K
Product Description
Product Overview
The D4KB100 is a single-phase, half-wave bridge rectifier designed for printed circuit board applications. It features glass passivation for a low reverse leakage and high forward surge current capability, with a molded plastic body and solder-plated terminals. This rectifier is ideal for general-purpose use with a maximum average forward rectified current of 4.0A and a repetitive peak reverse voltage of up to 1000V.
Product Attributes
- Case: Molded plastic body
- Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
- Polarity: Polarity symbol marking on body
- Mounting Position: Any
- Flammability Classification: Underwriters Laboratory 94V-0
Technical Specifications
| Parameter | Symbol | D4KB100 | Units | Conditions |
|---|---|---|---|---|
| Maximum Ratings And Electrical Characteristics | Ratings at 25 C ambient temperature unless otherwise specified. | |||
| Maximum RMS voltage | VRMS | 140 | V | |
| Maximum DC blocking voltage | VDC | 1000 | V | |
| Maximum average forward rectified current | I(AV) | 4.0 | A | Single phase half-wave 60Hz, resistive or inductive load; with heatsink |
| Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load | IFSM | 120.0 | A | 1 cycle, 1000 |
| Maximum instantaneous forward voltage at 4.0A | VF | 1.10 | V | |
| Maximum DC reverse current at rated DC blocking voltage | IR | 5.0 | A | TA =25 C |
| Maximum DC reverse current at rated DC blocking voltage | IR | 1000 | A | TA=125 C |
| Operating junction and storage temperature range | TJ,TSTG | -55 to +150 | C | |
| Typical thermal resistance | RqJA | 38.0 | C/W | with heatsink |
| Typical junction capacitance | CJ | 500 | pF | 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. |
| I t Rating for fusing (t=8.3ms, Ta=25 C) | 59.8 | A s | 2 |
2410121844_Huixin-D4KB100_C3003054.pdf
Related Products
Silicon Carbide Power MOSFET YANGJIE YJD212040NCFG2 Designed for Fast Switching and High Temperature
Product OverviewThe YJD212040NCFG2 is a Silicon Carbide Power MOSFET (N-Channel Enhancement) designed for high-speed switching applications. It offers essentially no switching losses, reduced heat sink requirements, and a maximum working temperature of 175 C. Key features include high blocking ...
Small Signal Zener Diodes Including YANGJIE BZX584C3V9Q for General Purpose Voltage Regulation
Small Signal Zener DiodesThe BZX584C2V4Q thru BZX584C47VQ series are small signal Zener diodes designed for general regulation functions. These diodes feature an epoxy casing that meets UL-94 V-0 flammability rating and is halogen-free. They are moisture sensitivity level 1 and AEC-Q101 qualified ...
Silicon Carbide Schottky Barrier Diode Wolfspeed E4D20120A 1200 Volt 20 Amp Automotive Grade Device
Product Overview This 4th Generation 1200 V, 20 A Silicon Carbide (SiC) Schottky Barrier diode, designated E4D20120A, offers significant performance advantages over silicon-based solutions. Power electronics systems can achieve higher efficiency standards, reach higher frequencies, and attain ...
Epoxy Encapsulation Zener Diode YANGJIE BZX84B6V8Q Small Signal Device With Automotive Qualification
Product OverviewThe BZX84B3V6Q thru BZX84B36Q series are small signal Zener diodes designed for general regulation functions. They feature epoxy encapsulation meeting UL-94 V-0 flammability rating and are halogen-free. These diodes offer a Zener voltage range from 3.6V to 36V with approximately 2% ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
