High reliability single phase bridge rectifier JUXING KBJ1010 designed for in power supply circuits
Key Attributes
Model Number:
KBJ1010
Product Custom Attributes
Non-Repetitive Peak Forward Surge Current:
175A
Operating Junction Temperature Range:
-55℃~+150℃@(Tj)
Voltage - Forward(Vf@If):
1V
Current - Rectified:
10A
Voltage - DC Reverse(Vr):
1kV
Mfr. Part #:
KBJ1010
Package:
KBJ
Product Description
Product Overview
The KBJ10005 THRU KBJ1010 is a series of glass-passivated single-phase bridge rectifiers designed for printed circuit board applications. Featuring a molded plastic construction with UL 94V-0 flammability classification, these rectifiers offer reliable, low-cost performance. They are ideal for various power supply and rectification circuits.
Product Attributes
- Brand: KBJ
- Construction: Glass Passivated Chip Junction, Molded Plastic
- Flame Retardant: UL 94V-0
- Terminal Type: Solderable per MIL-STD-202, Method 208
- Mounting Position: Any
- Weight: 0.16 ounce (4.6 gram)
Technical Specifications
| Model | Max. Recurrent Peak Reverse Voltage (VRRM) | Max. RMS Voltage (VRMS) | Max. DC Blocking Voltage (VDC) | Max. Average Forward Rectified Current (I(AV)) at TC=100 | Peak Forward Surge Current (IFSM) 8.3ms | Max. Forward Voltage (VF) at 5.0A DC, 25 | Max. Reverse Current (IR) at TA=25 | Typical Junction Capacitance (CJ) | Typical Thermal Resistance (RJC) | Operating & Storage Temp (TJ, Tstg) |
| KBJ10005 | 50V | 35V | 50V | 10.0A | 175A | 1.0V | 100uA | 50pF | 3/W | -55 to +150 |
| KBJ1001 | 100V | 70V | 100V | 10.0A | 175A | 1.0V | 100uA | 50pF | 3/W | -55 to +150 |
| KBJ1002 | 200V | 140V | 200V | 10.0A | 175A | 1.0V | 100uA | 50pF | 3/W | -55 to +150 |
| KBJ1004 | 400V | 280V | 400V | 10.0A | 175A | 1.0V | 100uA | 50pF | 3/W | -55 to +150 |
| KBJ1006 | 600V | 420V | 600V | 10.0A | 175A | 1.0V | 100uA | 50pF | 3/W | -55 to +150 |
| KBJ1008 | 800V | 560V | 800V | 10.0A | 175A | 1.0V | 100uA | 50pF | 3/W | -55 to +150 |
| KBJ1010 | 1000V | 700V | 1000V | 10.0A | 175A | 1.0V | 100uA | 50pF | 3/W | -55 to +150 |
Notes:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal Resistance from Junction to Case with Device Mounted on 75mm x 75mm x 1.6mm Cu Plate Heatsink.
2209061800_JUXING-KBJ1010_C5158801.pdf
Related Products
Small signal Zener diode YANGJIE MMSZ5229BQ epoxy UL94 V0 flammability rating with tin leads
Product OverviewThe MMSZ5221BQ THRU MMSZ5261BQ series are small signal Zener diodes designed for general regulation functions. These diodes feature epoxy that meets UL-94 V-0 flammability rating and is halogen-free, with a Moisture Sensitivity Level 1. They offer Zener voltages ranging from 2.4V to ...
N Channel MOSFET YANGJIE YJA3134KB with Enhanced Load Switching and High Power Dissipation Capabilities
Product OverviewThe YJA3134KB is a N-Channel Enhancement Mode Field Effect Transistor utilizing Trench Power LV MOSFET technology. It offers high power and current handling capabilities, ESD protection up to 2.0KV (HBM), and meets UL 94 V-0 flammability rating. This device is designed for PWM ...
Silicon Carbide Power MOSFET YANGJIE YJD212040NCFG2 Designed for Fast Switching and High Temperature
Product OverviewThe YJD212040NCFG2 is a Silicon Carbide Power MOSFET (N-Channel Enhancement) designed for high-speed switching applications. It offers essentially no switching losses, reduced heat sink requirements, and a maximum working temperature of 175 C. Key features include high blocking ...
YANGJIE MG400HF12MIC2 IGBT module featuring fast switching speeds and low stray inductance for power supplies
Product OverviewThe MG400HF12MIC2 is a high-power IGBT module designed for demanding applications. It features short circuit rating, low stray inductance, and low switching losses, with a VCE(sat) exhibiting a positive temperature coefficient for enhanced reliability. The module offers fast ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
