Resistor equipped transistor RET Nexperia PDTA123YT215 PNP transistor for amplification and switching
Key Attributes
Model Number:
PDTA123YT,215
Product Custom Attributes
Input Resistor:
2.86kΩ
Resistor Ratio:
5.5
Collector - Emitter Voltage VCEO:
50V
Mfr. Part #:
PDTA123YT,215
Package:
SOT-23
Product Description
Product Overview
The PDTA123Y series consists of PNP Resistor-Equipped Transistors (RET) designed for general-purpose switching and amplification applications. These transistors simplify circuit design by integrating bias resistors, reducing component count and pick-and-place costs. They are suitable for use as circuit drivers and in inverter and interface circuits.
Product Attributes
- Brand: Nexperia (formerly NXP)
- Product Type: PNP Resistor-Equipped Transistors (RET)
- Internal Resistors: R1 = 2.2 k, R2 = 10 k
Technical Specifications
| Type Number | Package | NPN Complement | R1 Bias Resistor (Input) | R2/R1 Bias Resistor Ratio | Collector-Emitter Voltage (VCEO) | Output Current (IO) |
|---|---|---|---|---|---|---|
| PDTA123YE | SOT416 (SC-75) | PDTC123YE | 1.54 - 2.86 k (Typ 2.2 k) | 3.6 - 5.5 (Typ 4.5) | -50 V | -100 mA |
| PDTA123YK | SOT346 (SC-59A / TO-236) | PDTC123YK | 1.54 - 2.86 k (Typ 2.2 k) | 3.6 - 5.5 (Typ 4.5) | -50 V | -100 mA |
| PDTA123YM | SOT883 (SC-101) | PDTC123YM | 1.54 - 2.86 k (Typ 2.2 k) | 3.6 - 5.5 (Typ 4.5) | -50 V | -100 mA |
| PDTA123YS | SOT54 (SC-43A / TO-92) | PDTC123YS | 1.54 - 2.86 k (Typ 2.2 k) | 3.6 - 5.5 (Typ 4.5) | -50 V | -100 mA |
| PDTA123YT | SOT23 (TO-236AB) | PDTC123YT | 1.54 - 2.86 k (Typ 2.2 k) | 3.6 - 5.5 (Typ 4.5) | -50 V | -100 mA |
| PDTA123YU | SOT323 (SC-70) | PDTC123YU | 1.54 - 2.86 k (Typ 2.2 k) | 3.6 - 5.5 (Typ 4.5) | -50 V | -100 mA |
| Symbol | Parameter | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| VCEO | Collector-emitter voltage | open base | - | - | -50 | V |
| IO | Output current (DC) | - | - | - | -100 | mA |
| R1 | Bias resistor 1 (input) | - | 1.54 | 2.2 | 2.86 | k |
| R2/R1 | Bias resistor ratio | - | 3.6 | 4.5 | 5.5 | - |
| VCBO | Collector-base voltage | open emitter | - | - | -50 | V |
| VEBO | Emitter-base voltage | open collector | - | - | -5 | V |
| VI | Input voltage | positive | - | - | +5 | V |
| VI | Input voltage | negative | - | - | -12 | V |
| ICM | Peak collector current | - | - | - | -100 | mA |
| Ptot | Total power dissipation | Tamb 25 C (SOT416) | - | - | 150 | mW |
| Ptot | Total power dissipation | Tamb 25 C (SOT346) | - | - | 250 | mW |
| Ptot | Total power dissipation | Tamb 25 C (SOT883) | - | - | 250 | mW |
| Ptot | Total power dissipation | Tamb 25 C (SOT54) | - | - | 500 | mW |
| Ptot | Total power dissipation | Tamb 25 C (SOT23) | - | - | 250 | mW |
| Ptot | Total power dissipation | Tamb 25 C (SOT323) | - | - | 200 | mW |
| Tstg | Storage temperature | - | -65 | - | +150 | C |
| Tj | Junction temperature | - | - | - | 150 | C |
| Tamb | Ambient temperature | - | -65 | - | +150 | C |
| Rth(j-a) | Thermal resistance junction to ambient | in free air (SOT416) | - | - | 833 | K/W |
| Rth(j-a) | Thermal resistance junction to ambient | in free air (SOT346) | - | - | 500 | K/W |
| Rth(j-a) | Thermal resistance junction to ambient | in free air (SOT883) | - | - | 500 | K/W |
| Rth(j-a) | Thermal resistance junction to ambient | in free air (SOT54) | - | - | 250 | K/W |
| Rth(j-a) | Thermal resistance junction to ambient | in free air (SOT23) | - | - | 500 | K/W |
| Rth(j-a) | Thermal resistance junction to ambient | in free air (SOT323) | - | - | 625 | K/W |
| ICBO | Collector-base cut-off current | VCB = -50 V; IE = 0 A | - | - | -100 | nA |
| ICEO | Collector-emitter cut-off current | VCE = -30 V; IB = 0 A | - | - | -1 | A |
| ICEO | Collector-emitter cut-off current | VCE = -30 V; IB = 0 A; Tj = 150 C | - | - | -50 | A |
| IEBO | Emitter-base cut-off current | VEB = -5 V; IC = 0 A | - | - | -700 | A |
| hFE | DC current gain | VCE = -5 V; IC = -5 mA | 35 | - | - | - |
| VCEsat | Collector-emitter saturation voltage | IC = -10 mA; IB = -0.5 mA | - | - | -150 | mV |
| VI(off) | Off-state input voltage | VCE = -5 V; IC = -100 A | - | -0.75 | -0.3 | V |
| VI(on) | On-state input voltage | VCE = -300 mV; IC = -20 mA | -2.5 | -1.15 | - | V |
| Cc | Collector capacitance | VCB = -10 V; IE = ie = 0 A; f = 1 MHz | - | - | 2 | pF |
Ordering Information
| Type Number | Package Name | Description | Version |
|---|---|---|---|
| PDTA123YE | SC-75 | Plastic surface mounted package; 3 leads | SOT416 |
| PDTA123YK | SC-59A | Plastic surface mounted package; 3 leads | SOT346 |
| PDTA123YM | SC-101 | Leadless ultra small plastic package; 3 solder lands; body 1.0 0.6 0.5 mm | SOT883 |
| PDTA123YS [1] | SC-43A | Plastic single-ended leaded (through hole) package; 3 leads | SOT54 |
| PDTA123YT | - | Plastic surface mounted package; 3 leads | SOT23 |
| PDTA123YU | SC-70 | Plastic surface mounted package; 3 leads | SOT323 |
Marking Codes
| Type Number | Marking Code [1] |
|---|---|
| PDTA123YE | 14 |
| PDTA123YK | 13 |
| PDTA123YM | G2 |
| PDTA123YS | TA123Y |
| PDTA123YT | *AD |
| PDTA123YU | *13 |
Contact Information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
2410121813_Nexperia-PDTA123YT-215_C454937.pdf
Related Products
NPN General Purpose Amplifier YANGJIE MMBT2222AT SOT523 Package RoHS Compliant Electronic Component
Product OverviewThe MMBT2222AT is an NPN General Purpose Amplifier in a SOT-523 surface mount package, ideally suited for automatic insertion. It offers a moisture sensitivity level of 1 and meets UL-94 V-0 flammability rating, being halogen-free. This component is designed for general-purpose ...
Planar die Zener diode XZT BZT52C7V5 designed for medium current applications and automated assembly
Product OverviewThe BZT52C2V4 thru BZT52C43 series is a range of Zener diodes featuring planar die construction. These diodes are designed for general purpose, medium current applications and are ideally suited for automated assembly processes. They are available in a lead-free version.Product ...
Planar Die Zener Diode Series Including XZT BZT52C18S Suitable for Medium Current Applications
Product OverviewThe BZT52C2V4S thru BZT52C43S series are planar die construction Zener diodes designed for general purpose, medium current applications. They are ideally suited for automated assembly processes and are available in lead-free versions. These diodes offer a wide range of Zener voltages ...
Durable YANGJIE MG450HF12TLC2 IGBT module featuring trench technology for motion control welding and UPS
Product OverviewThe MG450HF12TLC2 is a high-performance IGBT module designed for motion/servo control, high-frequency switching applications, UPS, and welding machines. It features low Vce(sat) with Trench technology, low switching losses (particularly Eoff), a positive temperature coefficient for ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
