Metal case ceramic insulator phase control thyristor VISHAY VS-ST730C08L1 for industrial applications
Key Attributes
Model Number:
VS-ST730C08L1
Product Custom Attributes
Holding Current (Ih):
600mA
Current - Gate Trigger(Igt):
200mA
Voltage - On State(Vtm):
-
Current - On State(It(RMS)):
2kA
Peak Off - State Voltage(Vdrm):
800V
SCR Type:
1 SCR
Operating Temperature:
-40℃~+125℃
Gate Trigger Voltage (Vgt):
3V
Mfr. Part #:
VS-ST730C08L1
Package:
TO-200AC
Product Description
Product Overview
The Vishay Semiconductors VS-ST700CL Series are Phase Control Thyristors in a Hockey PUK version, designed for industrial-level applications. Featuring a center amplifying gate and a metal case with a ceramic insulator, these thyristors offer robust performance in demanding environments. Typical applications include DC motor controls, controlled DC power supplies, and AC controllers. They are engineered and qualified for industrial use, ensuring reliability and efficiency in power control systems.
Product Attributes
- Brand: Vishay Semiconductors
- Series: VS-ST700CL
- Package: B-PUK (TO-200AC)
- Construction: Metal case with ceramic insulator
- Gate Type: Center amplifying gate
- Material Compliance: For definitions of compliance please see www.vishay.com/doc?99912
Technical Specifications
| Parameter | Test Conditions | Values | Units |
|---|---|---|---|
| Average On-State Current (IT(AV)) | Ths = 55 C | 910 | A |
| RMS On-State Current (IT(RMS)) | Ths = 25 C | 1857 | A |
| Peak Surge Current (ITSM) | 50 Hz, t = 10 ms | 15 700 | A |
| Peak Surge Current (ITSM) | 60 Hz, t = 8.3 ms | 16 400 | A |
| It | 50 Hz, t = 10 ms | 1232 | kAs |
| It | 60 Hz, t = 8.3 ms | 1125 | kAs |
| Repetitive Peak Off-State Voltage (VDRM/VRRM) | - | 1200 to 2000 | V |
| Turn-off Time (tq) | Typical | 150 | s |
| Operating Junction Temperature (TJ) | - | -40 to 125 | C |
| Maximum Average On-State Current | 180 conduction, half sine wave, double side cooled | 910 (355) | A |
| Maximum Average On-State Current | 180 conduction, half sine wave, single side cooled | (355) | A |
| Maximum RMS On-State Current | DC at 25 C heatsink temperature, double side cooled | 1857 | A |
| Maximum Peak, One-Cycle Non-Repetitive Surge Current (ITSM) | t = 10 ms, No voltage reapplied, Sinusoidal half wave, initial TJ = TJ maximum | 15 700 | A |
| Maximum Peak, One-Cycle Non-Repetitive Surge Current (ITSM) | t = 8.3 ms, No voltage reapplied, Sinusoidal half wave, initial TJ = TJ maximum | 16 400 | A |
| Maximum It for fusing | t = 10 ms, No voltage reapplied | 1232 | kAs |
| Maximum It for fusing | t = 8.3 ms, No voltage reapplied | 1125 | kAs |
| Maximum On-State Voltage (VTM) | Ipk = 2000 A, TJ = TJ maximum, tp = 10 ms sine pulse | 1.80 | V |
| Maximum Holding Current (IH) | TJ = 25 C, anode supply 12 V resistive load | 600 | mA |
| Maximum Non-Repetitive Rate of Rise of Turned-On Current (dI/dt) | Gate drive 20 V, 20 , tr 1 s, TJ = TJ maximum, anode voltage 80 % VDRM | 1000 | A/s |
| Typical Delay Time (td) | Gate current 1 A, dIg/dt = 1 A/s, Vd = 0.67 % VDRM, TJ = 25 C | 1.0 | s |
| Typical Turn-Off Time (tq) | ITM = 750 A, TJ = TJ maximum, dI/dt = 60 A/s, VR = 50 V, dV/dt = 20 V/s, gate 0 V 100 , tp = 500 s | 150 | s |
| Maximum Critical Rate of Rise of Off-State Voltage (dV/dt) | TJ = TJ maximum, linear to 80 % rated VDRM | 500 | V/s |
| Maximum Peak Reverse and Off-State Leakage Current (IRRM, IDRM) | TJ = TJ maximum, rated VDRM/VRRM applied | 80 | mA |
| Maximum Operating Junction Temperature Range (TJ) | - | -40 to 125 | C |
| Maximum Storage Temperature Range (TStg) | - | -40 to 150 | C |
| Maximum Thermal Resistance, Junction to Heatsink (RthJ-hs) | DC operation single side cooled | 0.073 | K/W |
| Maximum Thermal Resistance, Junction to Heatsink (RthJ-hs) | DC operation double side cooled | 0.031 | K/W |
| Mounting Force | 10 % | 14 700 (1500) | N (kg) |
| Approximate Weight | - | 255 | g |
Ordering Information
| Position | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
|---|---|---|---|---|---|---|---|
| Device Code | ST | 70 | 0 | C | [Voltage Code] | L | [Terminal Type] |
| Description | Vishay Semiconductors | Essential part number | 0 = converter grade | C = ceramic PUK | Voltage code x 100 = VRRM | L = PUK case B-PUK (TO-200AC) | 0 = eyelet terminals (gate and auxiliary cathode unsoldered leads) 1 = fast-on terminals (gate and auxiliary cathode unsoldered leads) 2 = eyelet terminals (gate and auxiliary cathode soldered leads) 3 = fast-on terminals (gate and auxiliary cathode soldered leads) |
Note: Critical dV/dt: None = 500 V/s (standard selection); L = 1000 V/s (special selection).
Related Documents
- Dimensions: www.vishay.com/doc?95076
2411272146_VISHAY-VS-ST730C08L1_C17681653.pdf
Related Products
Planar die Zener diode XZT BZT52C7V5 designed for medium current applications and automated assembly
Product OverviewThe BZT52C2V4 thru BZT52C43 series is a range of Zener diodes featuring planar die construction. These diodes are designed for general purpose, medium current applications and are ideally suited for automated assembly processes. They are available in a lead-free version.Product ...
Surface mount digital transistor YANGJIE DTC123YUA with built-in resistors and UL94 V0 flammability rating
Product OverviewThe DTC123YUA is a digital transistor with built-in resistors, designed for surface mount applications. It simplifies circuit configuration by eliminating the need for external input resistors, making it ideal for inverter circuits. The epoxy meets UL-94 V-0 flammability rating and ...
Durable YANGJIE MG450HF12TLC2 IGBT module featuring trench technology for motion control welding and UPS
Product OverviewThe MG450HF12TLC2 is a high-performance IGBT module designed for motion/servo control, high-frequency switching applications, UPS, and welding machines. It features low Vce(sat) with Trench technology, low switching losses (particularly Eoff), a positive temperature coefficient for ...
Digital Transistor YANGJIE UMH11N Dual NPN Type with Built In Bias Resistors and Surface Mount Design
Product OverviewThe UMH11N is a dual NPN digital transistor featuring built-in bias resistors, allowing for inverter circuit configuration without external input resistors. It is designed for surface mount applications and is ideally suited for automatic insertion. The epoxy meets UL-94 V-0 ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
