molded plastic bridge rectifier JSMSEMI GBU808 suitable for various electronic applications requiring high surge current
Product Overview
The GBU8005-GBU810 is a series of glass-passivated single-phase bridge rectifiers designed for printed circuit board applications. These rectifiers offer reliable, low-cost construction with a molded plastic technique, featuring a low forward voltage drop, low reverse leakage current, and high surge current capability. They are ideal for various applications requiring efficient rectification.
Product Attributes
- Brand: JSMICRO Semiconductor
- Construction: Molded plastic technique, Glass passivated chip junction
- Epoxy: UL 94V-O rate flame retardant
- Terminals: Solderable per MIL-STD-202, method 208
- Mounting Position: Any
Technical Specifications
| Model | Maximum Recurrent Peak Reverse Voltage (VRRM) | Maximum RMS Voltage (VRMS) | Maximum DC Blocking Voltage (VDC) | Maximum Average Forward Rectified Current (I(AV)) TC=100 (Note 1) | Peak Forward Surge Current, 8.3ms (IFSM) | Maximum Forward Voltage at 8.0A DC and 25 (VF) | Maximum Reverse Current at TA=25 (IR) | Typical Junction Capacitance (CJ) (Note 3) | Typical Thermal Resistance (RJA) (Note 4) | Typical Thermal Resistance (RJC) (Note 4) | Operating and Storage Temperature Range (TJ, Tstg) |
| GBU8005 | 50V | 35V | 50V | 5.0A | 200A | 1.1V | 255µA | 125pF | 7°/W | 3.2°/W | -55 to +150°C |
| GBU801 | 100V | 70V | 100V | ||||||||
| GBU802 | 200V | 140V | 200V | ||||||||
| GBU804 | 400V | 280V | 400V | ||||||||
| GBU806 | 600V | 420V | 600V | ||||||||
| GBU808 | 800V | 560V | 800V | ||||||||
| GBU810 | 1000V | 700V | 1000V |
Notes:
1- Units case mounted on 3.2 x 3.2 x 0.12 thick (8.2 x 8.2 x 0.3cm) Al plate heatsink.
2- Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screws.
3- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
4- Units mounted in free air, no heatsink on P.C.B., 0.5 x 0.5 (12 x 12mm) copper pads, 0.375 lead length.
2411291458_JSMSEMI-GBU808_C42400695.pdf
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
