Silicon bridge rectifier model LGE GBU25J with 25 amp forward current and UL 94V-O rated plastic material
Silicon Bridge Rectifiers GBU25A-GBU25M
Ideal for printed circuit board applications, these silicon bridge rectifiers offer reliable, low-cost construction utilizing a molded plastic technique. The plastic material has a U/L flammability classification of 94V-O, and the mounting position is any.
Product Attributes
- Brand: LGE Semiconductor
- Origin: Not specified
- Material: Molded plastic
- Color: Not specified
- Certifications: U/L flammability classification 94V-O
Technical Specifications
| Characteristic | Symbol | GBU25A | GBU25B | GBU25D | GBU25G | GBU25J | GBU25K | GBU25M | UNITS |
| Maximum recurrent peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | V |
| Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | V |
| Maximum average forward Output current @TC=100 | IF(AV) | 25 | A | ||||||
| Peak forward surge current 8.3ms single half-sine-wav superimposed on rated load | IFSM | 300 | A | ||||||
| Typical junction capacitance per leg (note 3) | CJ | 211 | pF | ||||||
| Typical thermal resistance per leg (note 2) (note 1) | RJA | 7.0 | /W | ||||||
| Typical thermal resistance per leg (note 2) (note 1) | RJC | 2 | /W | ||||||
| Operating junction temperature range | TJ | -55 ---- +150 | |||||||
| Storage temperature range | TSTG | -55 ---- +150 | |||||||
| Maximum instantaneous forward voltage @12.5A | VF | 1.1 | V | ||||||
| Maximum reverse current @TA=25 at rated DC blocking voltage | IR | 5.0 | A | ||||||
| Maximum reverse current @TA=125 | IR | 500 | A | ||||||
| It Rating for fusing @Tj=25 | It | 9373 | AS | ||||||
Dimensional Information
| Dim | Min | Max | Units |
| A | 21.60 | 22.40 | mm |
| B | 18.20 | 19.80 | mm |
| C | 3.20 | 3.80 | mm |
| C1 | 1.80 | 2.80 | mm |
| E | 0.40 | 0.60 | mm |
| F | 17.00 | min | mm |
| F1 | 1.70 | 2.40 | mm |
| I | 0.95 | 1.25 | mm |
| K | 4.70 | 5.30 | mm |
| P | R1.9 | typical | mm |
Notes:
1. Unit case mounted on 3.2x3.2x0.12" thick (6.2x8.2x0.3cm) AI. Plate.
2. Units mounted in free air, no heat sink on P.C.B., 0.5x0.5"(12x12mm) copper pads, 0.375"(9.5mm) lead length.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts.
2411261516_LGE-GBU25J_C5190019.pdf
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.