Sensitive Gate Triggering Littelfuse C106DG Glassivated PNPN Device for Temperature and Speed Control
Key Attributes
Model Number:
C106DG
Product Custom Attributes
Holding Current (Ih):
190uA
Current - Gate Trigger(Igt):
15uA
Voltage - On State(Vtm):
2.2V
Average Gate Power Dissipation (PG(AV)):
-
Current - On State(It(RMS)):
4A
Peak Off - State Voltage(Vdrm):
400V
Current - Surge(Itsm@f):
20A
Operating Temperature:
-40℃~+110℃
Mfr. Part #:
C106DG
Package:
TO-225-3
Product Description
Product Overview
Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability of operation is important. Features include glassivated surface for reliability and uniformity, power rated at economical prices, practical level triggering and holding characteristics, flat, rugged, Thermopad construction for low thermal resistance, high heat dissipation and durability, and sensitive gate triggering. These are Pb-Free devices.
Product Attributes
- Brand: Littelfuse
- Origin: Not specified
- Material: Glassivated PNPN
- Certifications: Pb-Free
Technical Specifications
| Rating Symbol | Description | C106B | C106D, C106D1* | C106M | Unit |
| VDRM, VRRM | Peak Repetitive OffState Voltage (Sine wave, 50-60 Hz, RGK = 1 K, TC = -40 to 110C) | 200 | 400 | 600 | V |
| IT (RMS) | On-State RMS Current (180 Conduction Angles, TC = 80C) | 4.0 | A | ||
| IT(AV) | Average OnState Current (180 Conduction Angles, TC = 80C) | 2.55 | A | ||
| ITSM | Peak Non-Repetitive Surge Current (1/2 Cycle, Sine Wave, 60 Hz, TJ = +25C) | 20 | A | ||
| I2t | Circuit Fusing Considerations (t = 8.3 ms) | 1.65 | A2s | ||
| IGM | Forward Peak Gate Current (Pulse Width 1.0 sec, TC = 80C) | 0.2 | A | ||
| PGM | Forward Peak Gate Power (Pulse Width 1.0 sec, TC = 80C) | 0.5 | W | ||
| PG(AV) | Forward Average Gate Power (Pulse Width 1.0 sec, TC = 80C) | 0.1 | W | ||
| TJ | Operating Junction Temperature Range | -40 to +110 | C | ||
| Tstg | Storage Temperature Range | -40 to +150 | C | ||
| Mounting Torque (Note 2) | Mounting Torque | 6.0 | in. lb. | ||
| RJC | Thermal Resistance, JunctiontoCase (AC) | 3.0 | C/W | ||
| RJA | Thermal Resistance, JunctiontoAmbient | 75 | C/W | ||
| TL | Maximum Lead Temperature for Soldering Purposes, 1/8 from case for 10 seconds | 260 | C | ||
| IDRM, IRRM | Peak Repetitive Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, RGK = 1 k) TJ = 25C | 10 | A | ||
| IDRM, IRRM | Peak Repetitive Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, RGK = 1 k) TJ = 110C | 100 | A | ||
| VTM | Peak Forward On-State Voltage (Note 3) (ITM = 4 A) | 2.2 | V | ||
| IGT | Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 , All Quadrants) TJ = 25C | 15 - 200 | A | ||
| IGT | Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 , All Quadrants) TJ = -40C | 35 - 500 | A | ||
| VGRM | Peak Reverse Gate Voltage (IGR = 10 A) | 6.0 | V | ||
| VGT | Gate Trigger Voltage (Continuous dc) (VD = 12 Vdc, RL = 100 , TC = 25C) TJ = 25C | 0.4 - 0.8 | V | ||
| VGT | Gate Trigger Voltage (Continuous dc) (VD = 12 Vdc, RL = 100 , TC = 25C) TJ = -40C | 0.5 - 1.0 | V | ||
| VGD | Gate NonTrigger Voltage (Continuous dc) (Note 4) (VAK = 12 V, RL = 100 , TJ = 110C) | 0.2 | V | ||
| IL | Latching Current (VAK = 12 V, IG = 20 mA, RGK = 1 k) TJ = 25C | 0.20 - 5.0 | mA | ||
| IL | Latching Current (VAK = 12 V, IG = 20 mA, RGK = 1 k) TJ = -40C | 0.35 - 7.0 | mA | ||
| IH | Holding Current (VD = 12 Vdc) (Initiating Current = 20 mA, RGK = 1 k) TJ = 25C | 0.19 - 3.0 | mA | ||
| IH | Holding Current (VD = 12 Vdc) (Initiating Current = 20 mA, RGK = 1 k) TJ = -40C | 0.33 - 6.0 | mA | ||
| IH | Holding Current (VD = 12 Vdc) (Initiating Current = 20 mA, RGK = 1 k) TJ = +110C | 0.07 - 2.0 | mA | ||
| dv/dt | Critical Rate-of-Rise of Off State Voltage (VAK = Rated VDRM, Exponential Waveform, RGK = 1k,TJ = 110C) | 8.0 | V/s | ||
2410121940_Littelfuse-C106DG_C151644.pdf
Related Products
High Voltage IGBT Module YANGJIE DGW10N120CTL Featuring Fast Recovery Diode for AC DC Servo Drive Amplifiers
Product Overview The DGW10N120CTL S-M352D is a high-performance IGBT module featuring Low VCE(sat) Trench-FS IGBT technology, a maximum junction temperature of 175, and a positive temperature coefficient. It includes a fast and soft recovery anti-parallel FWD and boasts high short circuit capability ...
General purpose NPN transistor YANGJIE BCX56 with tin plated leads and low saturation voltage
Product OverviewThe BCX56 is an NPN General Purpose Amplifier from Yangzhou Yangjie Electronic Technology Co., Ltd. It features a low collector-emitter saturation voltage and is housed in a SOT-89 package with UL-94 V-0 flammability rating. Halogen-free options are available upon request. This ...
Surface Mount Schottky Bridge Rectifier YONGYUTAI MB14F with 40 Volt Reverse Voltage and 1 Amp Forward Current
Product OverviewThis MBF package Surface Mount Schottky Bridge rectifier offers a reverse voltage range of 40 to 200V and a forward current of 1A. It features high surge current capability and is designed for surface mount applications. Ideal for single-phase half-wave 60 Hz rectification with ...
Robust industrial IGBT module YANGJIE MG50HF12TLC1 with low VCEsat and high short circuit capability
Product OverviewThe MG50HF12TLC1 S-M392 is a high-performance IGBT module designed for inverter applications, AC/DC servo drive amplifiers, UPS systems, and soft switching welding machines. It features low VCE(sat) with Trench technology, a positive temperature coefficient for VCE(sat), high short ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
