Durable MSKSEMI ULN2803 Darlington Driver Array Featuring Eight Channels for Logic Buffering and Motor Control
Product Overview
The ULN2803 is a monolithic integrated high-voltage, high-current Darlington array featuring eight independent Darlington driver channels. Each channel includes a clamp diode for inductive loads like relays and stepper motors. By paralleling Darlingtons, higher output current capabilities can be achieved. This device is widely used for relay driving, lighting control, LED displays, stepper motor driving, and logic buffering. Each Darlington channel has a 2.7K base resistor, allowing direct connection to TTL/CMOS circuits at a 5V operating voltage.
Product Attributes
- Brand: MSKSEMI
- Origin: Semiconductor Compiance (implied from website/context)
Technical Specifications
| Parameter | Symbol | Test Condition | Min | Typ | Max | Unit |
| Output Leakage Current | ICEX | VCE = 50V, Ta=25C | - | 0 | 50 | A |
| VCE = 50V, Ta=85C | - | 0 | 100 | A | ||
| Low Level Output Voltage | VCE(SAT) | IOUT =350mA, IIN =500A | - | 1.02 | 1.6 | V |
| IOUT =200mA, IIN =350A | - | 0.96 | 1.3 | V | ||
| IOUT =100mA, IIN =250A | - | 0.85 | 1.1 | V | ||
| Input Current | IIN(ON) | VIN =3.85V, IOUT 350mA | - | 0.71 | 1.35 | mA |
| Input Current | IIN(OFF) | IOUT =500A, Ta=85C | 4 | 50 | - | A |
| Input Voltage | VIN(ON) | IOUT =200mA | - | 1.8 | 2.4 | V |
| IOUT =250mA | - | 1.85 | 2.7 | V | ||
| VCE = 2V, IOUT =300mA, Ta=25C | - | 1.9 | 3.0 | V | ||
| Clamp Diode Reverse Leakage Current | IR | VR= 50V, Ta=25C | - | 0 | 50 | A |
| VR= 50V, Ta=85C | - | 0 | 100 | A | ||
| Clamp Diode Forward Voltage | VF | IF =350mA | - | 1.7 | 2.0 | V |
| Turn-on Delay Time | tON | VOUT=50V,RL=125,CL=15pF | - | 0.1 | 1 | S |
| Turn-off Delay Time | tOFF | VOUT=50V,RL=125,CL=15pF | - | 0.2 | 1 | S |
| Parameter | Symbol | Limit | Unit |
| Input Voltage | VIN | 30 | V |
| Output Voltage | VCE | 50 | V |
| Collector Current | IC | 500 | mA |
| Base Current | IB | 25 | mA |
| Operating Temperature | TA | -40~85 | |
| Storage Temperature | TS | -65~150 |
Note: (1) Power test conditions: glass epoxy PCB board (30301.6mm, 50% copper). (2) Absolute maximum ratings are limits that should not be exceeded under any conditions. Exceeding these limits may cause product degradation or physical damage. Normal operation is not guaranteed near these limits.
Pin Configuration
| Pin No. | Pin Name | Pin Function Description | Pin No. | Pin Name | Pin Function Description |
| 1 | 1IN | Channel 1 Input | 18 | 1OUT | Channel 1 Output |
| 2 | 2IN | Channel 2 Input | 17 | 2OUT | Channel 2 Output |
| 3 | 3IN | Channel 3 Input | 16 | 3OUT | Channel 3 Output |
| 4 | 4IN | Channel 4 Input | 15 | 4OUT | Channel 4 Output |
| 5 | 5IN | Channel 5 Input | 14 | 5OUT | Channel 5 Output |
| 6 | 6IN | Channel 6 Input | 13 | 6OUT | Channel 6 Output |
| 7 | 7IN | Channel 7 Input | 12 | 7OUT | Channel 7 Output |
| 8 | 8IN | Channel 8 Input | 11 | 8OUT | Channel 8 Output |
| 9 | GND | Ground | 10 | COMMON | Common Terminal of Clamp Diodes |
Typical Application Circuits
1. LED Driver Circuit
(Diagram omitted as it cannot be represented in plain text HTML)
Note: The 1K resistors can be adjusted based on VCC voltage and desired LED current.
2. Stepper Motor Driver Circuit
(Diagram omitted as it cannot be represented in plain text HTML)
Package Mechanical Data
DIP-18 Package
Unit: mm / inch
(Diagram omitted as it cannot be represented in plain text HTML)
SOP-18 Package
Unit: mm / inch
(Diagram omitted as it cannot be represented in plain text HTML)
2211110930_MSKSEMI-ULN2803_C5252904.pdf
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
