High speed inverter smart power module onsemi FSAM15SH60 with advanced current sensing and protection
Product Overview
The FSAM15SH60 is an advanced Smart Power Module (SPM) designed for compact and high-performance AC motor drives, particularly for high-speed, low-power inverter-driven applications like washing machines. It integrates optimized circuit protection and drive capabilities with low-loss IGBTs. Key features include advanced current sensing for short-circuit protection, built-in over-temperature monitoring, and under-voltage lock-out. The high-speed HVIC enables opto-coupler-less gate driving and supports single-supply drive topology, reducing system size and complexity. Divided negative DC terminals facilitate inverter current sensing.
Product Attributes
- Brand: Fairchild Semiconductor Corporation
- Model: FSAM15SH60
- Type: SPM (Smart Power Module)
- Certifications: UL Certified No. E209204
- Material: Ceramic substrate
Technical Specifications
| Item | Condition | Rating | Unit |
| Inverter Part | |||
| Supply Voltage | VPN | 450 | V |
| Supply Voltage (Surge) | VPN(Surge) | 500 | V |
| Collector-Emitter Voltage | VCES | 600 | V |
| Each IGBT Collector Current | TC = 25C | 15 | A |
| Each IGBT Collector Current | TC = 100C | 9 | A |
| Each IGBT Collector Current (Peak) | TC = 25C, Instantaneous Value (Pulse) | 30 | A |
| Collector Dissipation | TC = 25C per One Chip | 46 | W |
| Operating Junction Temperature | TJ (Note 1) | -20 ~ 125 | C |
| Control Part | |||
| Control Supply Voltage | VCC | 20 | V |
| High-side Control Bias Voltage | VBS | 20 | V |
| Input Signal Voltage | VIN | -0.3~VCC+0.3 | V |
| Fault Output Supply Voltage | VFO | -0.3~VCC+0.3 | V |
| Fault Output Current | IFO Sink Current at VFO Pin | 5 | mA |
| Current Sensing Input Voltage | VSC | -0.3~VCC+0.3 | V |
| Self Protection | |||
| Supply Voltage Limit (Short-Circuit Protection Capability) | VPN(PROT) VCC = VBS = 13.5 ~ 16.5V TJ = 25C, Non-repetitive, less than 6s | 400 | V |
| Module Case | |||
| Operation Temperature | TC Note Fig.2 | -20 ~ 100 | C |
| Storage Temperature | TSTG | -20 ~ 125 | C |
| Isolation Voltage | VISO 60Hz, Sinusoidal, AC 1 minute, Connection Pins to Heat-sink Plate | 2500 | Vrms |
| Thermal Resistance | |||
| Junction to Case Thermal Resistance | Rth(j-c)Q Each IGBT under Inverter Operating Condition | 2.71 | C/W |
| Junction to Case Thermal Resistance | Rth(j-c)F Each FWDi under Inverter Operating Condition | 3.71 | C/W |
| Contact Thermal Resistance | Rth(c-h) Ceramic Substrate (per 1 Module) Thermal Grease Applied (Note 3) | 0.06 | C/W |
| Electrical Characteristics | |||
| Collector - Emitter Saturation Voltage | VCE(SAT) VCC = VBS = 15V VIN = 0V IC = 15A, TJ = 25C | 2.8 | V |
| FWDi Forward Voltage | VFM VIN = 5V IC = 15A, TJ = 25C | 2.5 | V |
| Switching Times | tON VPN = 300V, VCC = VBS = 15V IC = 15A, TJ = 25C VIN = 5V 0V, Inductive Load (High, Low-side) (Note 4) | 0.39 | us |
| Switching Times | tC(ON) | 0.12 | us |
2411272356_onsemi-FSAM15SH60_C19616292.pdf
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.