High voltage gate drive onsemi FSBS5CH60 module suitable for ac induction bldc and pmsm motor drives
Key Attributes
Model Number:
FSBS5CH60
Product Custom Attributes
Voltage - Isolation:
2500Vrms
Mfr. Part #:
FSBS5CH60
Package:
DIP-27
Product Description
Product Overview
The FSBS5CH60 is a Motion SPM 3 module designed for AC Induction, BLDC, and PMSM motors. It offers a fully-featured, high-performance inverter output stage with optimized gate drive for reduced EMI and losses. The module includes integrated protection features such as under-voltage lockouts, over-current shutdown, and fault reporting. Its built-in high-speed HVIC simplifies the design by requiring only a single supply voltage and translating logic-level gate inputs to high-voltage drive signals. Separate negative IGBT terminals are provided for flexible control algorithm implementation.
Product Attributes
- Brand: Fairchild Semiconductor Corporation
- Product Series: Motion SPM 3
- UL Certification: No. E209204 (UL1557)
Technical Specifications
| Parameter | Conditions | Rating | Unit | |
| Inverter Part | ||||
| Supply Voltage (VPN) | Applied between P- NU, NV, NW | 450 | V | |
| Supply Voltage (Surge) (VPN(Surge)) | Applied between P- NU, NV, NW | 500 | V | |
| Collector - Emitter Voltage (VCES) | 600 | V | ||
| Collector Current (IC) | TC = 25C | 5 | A | |
| Collector Current (Peak) (ICP) | TC = 25C, Under 1ms Pulse Width | 10 | A | |
| Collector Dissipation (PC) | TC = 25C per Chip | 25 | W | |
| Operating Junction Temperature (TJ) | -20 ~ 125 | C | ||
| Collector - Emitter Saturation Voltage (VCE(SAT)) | VCC = VBS = 15 V, VIN = 5 V, IC = 5 A, TJ = 25C | - | 2.3 | V |
| FWDi Forward Voltage (VF) | VIN = 0 V, IC = 5 A, TJ = 25C | - | 2.1 | V |
| Switching Time (tON) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.40 | s |
| Switching Time (tC(ON)) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.21 | s |
| Switching Time (tOFF) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.68 | s |
| Switching Time (tC(OFF)) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.25 | s |
| Switching Time (trr) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.10 | s |
| Switching Time (tON) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.56 | s |
| Switching Time (tC(ON)) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.28 | s |
| Switching Time (tOFF) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.72 | s |
| Switching Time (tC(OFF)) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.25 | s |
| Switching Time (trr) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive Load | - | 0.10 | s |
| Collector - Emitter Leakage Current (ICES) | VCE = VCES | - | 250 | A |
| Control Part | ||||
| Control Supply Voltage (VCC) | Applied between VCC(UH), VCC(VH), VCC(WH), VCC(L) - COM | 20 | V | |
| High-Side Control Bias Voltage (VBS) | Applied between VB(U) - VS(U), VB(V) - VS(V), VB(W) - VS(W) | 20 | V | |
| Input Signal Voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) - COM | -0.3 ~ 17 | V | |
| Fault Output Supply Voltage (VFO) | Applied between VFO - COM | -0.3 ~ VCC+0.3 | V | |
| Fault Output Current (IFO) | Sink Current at VFO Pin | 5 | mA | |
| Current-Sensing Input Voltage (VSC) | Applied between CSC - COM | -0.3 ~ VCC+0.3 | V | |
| System Ratings | ||||
| Self-Protection Supply Voltage Limit (VPN(PROT)) | VCC = VBS = 13.5 ~ 16.5 V, TJ = 125C, Non-Repetitive, < 2 s | 400 | V | |
| Module Case Operation Temperature (TC) | -20C TJ 125C | -20 ~ 100 | C | |
| Storage Temperature (TSTG) | -40 ~ 125 | C | ||
| Isolation Voltage (VISO) | 60 Hz, Sinusoidal, AC 1 Minute, Connect Pins to Heat Sink Plate | 2500 | Vrms | |
| Thermal Resistance | ||||
| Junction to Case Thermal Resistance (Rth(j-c)Q) | Inverter IGBT Part (per 1 / 6 module) | - | 3.9 | C/W |
| Junction to Case Thermal Resistance (Rth(j-c)F) | Inverter FWD Part (per 1 / 6 module) | - | 5.3 | C/W |
2411272116_onsemi-FSBS5CH60_C3615420.pdf
Related Products
N Channel Enhancement Mode MOSFET YANGJIE YJG70G06A with Low RDS ON and Excellent Thermal Performance
Product OverviewThe YJG70G06A is an N-Channel Enhancement Mode Field Effect Transistor from Yangzhou Yangjie Electronic Technology Co., Ltd. Featuring Split Gate Trench MOSFET technology and a high-density cell design, it offers excellent package heat dissipation and low RDS(ON). It is suitable for ...
Planar Die Zener Diode XZT BZT52C5V6S for Medium Current Applications Lead Free Version
XT ELECTRONICS BZT52C2V4S thru BZT52C43S ZENER DIODEThe XT ELECTRONICS BZT52C2V4S thru BZT52C43S series are planar die construction Zener diodes designed for general purpose and medium current applications. They are ideally suited for automated assembly processes and are available in lead-free ...
Durable YANGJIE MG450HF12TLC2 IGBT module featuring trench technology for motion control welding and UPS
Product OverviewThe MG450HF12TLC2 is a high-performance IGBT module designed for motion/servo control, high-frequency switching applications, UPS, and welding machines. It features low Vce(sat) with Trench technology, low switching losses (particularly Eoff), a positive temperature coefficient for ...
Silicon Carbide Schottky Barrier Diode Wolfspeed E4D20120A 1200 Volt 20 Amp Automotive Grade Device
Product Overview This 4th Generation 1200 V, 20 A Silicon Carbide (SiC) Schottky Barrier diode, designated E4D20120A, offers significant performance advantages over silicon-based solutions. Power electronics systems can achieve higher efficiency standards, reach higher frequencies, and attain ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
