motor control inverter module with onsemi FNA41560B5 offering single grounded power supply and protection features
Key Attributes
Model Number:
FNA41560B5
Product Custom Attributes
Mfr. Part #:
FNA41560B5
Package:
DIP-26
Product Description
Product Overview
The FNA41560 / FNA41560B2 is a Motion SPM 45 module designed for AC Induction, BLDC, and PMSM motor control. It provides a fully-featured, high-performance inverter output stage with integrated gate drivers and protection features, including under-voltage lockout, over-current shutdown, thermal monitoring, and fault reporting. The module simplifies PCB layout with built-in bootstrap diodes and dedicated VS pins, and offers a single-grounded power supply. Optimized for 5 kHz switching frequency, it is suitable for motion control applications in home appliances and industrial motors.
Product Attributes
- Brand: Fairchild Semiconductor Corporation
- Series: Motion SPM 45
- Certifications: UL Certified No. E209204 (UL1557)
Technical Specifications
| Parameter | Conditions | Rating | Unit |
| Inverter Part | |||
| Supply Voltage (VPN) | Applied between P - NU, NV, NW | 450 | V |
| Supply Voltage (Surge) (VPN(Surge)) | Applied between P - NU, NV, NW | 500 | V |
| Collector - Emitter Voltage (VCES) | 600 | V | |
| Each IGBT Collector Current ( IC) | TC = 25C, TJ <150C | 15 | A |
| Each IGBT Collector Current (Peak) ( ICP) | TC = 25C, TJ < 150C, Under 1 ms Pulse Width | 30 | A |
| Collector Dissipation (PC) | TC = 25C per Chip | 41 | W |
| Operating Junction Temperature (TJ) | -40 ~ 150 | C | |
| Control Part | |||
| Control Supply Voltage (VCC) | Applied between VCC(H), VCC(L) - COM | 20 | V |
| High-Side Control Bias Voltage (VBS) | Applied between VB(U) - VS(U), VB(V) - VS(V), VB(W) - VS(W) | 20 | V |
| Input Signal Voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) - COM | -0.3 ~ VCC + 0.3 | V |
| Fault Output Supply Voltage (VFO) | Applied between VFO - COM | -0.3 ~ VCC + 0.3 | V |
| Fault Output Current (IFO) | Sink Current at VFO pin | 1 | mA |
| Current-Sensing Input Voltage (VSC) | Applied between CSC - COM | -0.3 ~ VCC + 0.3 | V |
| Bootstrap Diode Part | |||
| Maximum Repetitive Reverse Voltage (VRRM) | 600 | V | |
| Forward Current (IF) | TC = 25C, TJ <150C | 0.50 | A |
| Forward Current (Peak) (IFP) | TC = 25C, TJ < 150C, Under 1 ms Pulse Width | 1.50 | A |
| Operating Junction Temperature (TJ) | -40 ~ 150 | C | |
| Total System Thermal Resistance | |||
| Self-Protection Supply Voltage Limit (VPN(PROT)) | VCC = VBS = 13.5 ~ 16.5 V, TJ = 150C, Non-Repetitive, < 2 s | 400 | V |
| Storage Temperature (TSTG) | -40 ~ 125 | C | |
| Isolation Voltage (VISO) | 60 Hz, Sinusoidal, AC 1 Minute, Connect Pins to Heat Sink Plate | 2000 | Vrms |
| Junction to Case Thermal Resistance (Rth(j-c)Q) | Inverter IGBT Part (per 1 / 6 module) | 3.0 | C / W |
| Junction to Case Thermal Resistance (Rth(j-c)F) | Inverter FWDi Part (per 1 / 6 module) | 4.3 | C / W |
| Electrical Characteristics (Typical) | |||
| Collector - Emitter Saturation Voltage (VCE(SAT)) | VCC = VBS = 15 V, VIN = 5 V, IC = 15 A, TJ = 25C | 1.8 ~ 2.3 | V |
| FWDi Forward Voltage (VF) | VIN = 0 V, IF = 15 A, TJ = 25C | 1.8 ~ 2.3 | V |
| High-Side Switching Times (tON) | VPN = 300 V, VCC = VBS = 15 V, IC = 15 A, TJ = 25C, VIN = 0 V 5 V, Inductive Load | 0.45 ~ 1.25 | s |
| High-Side Switching Times (tC(ON)) | 0.25 ~ 0.50 | s | |
| High-Side Switching Times (tOFF) | 0.75 ~ 1.25 | s | |
| High-Side Switching Times (tC(OFF)) | 0.25 ~ 0.50 | s | |
| High-Side Switching Times (trr) | 0.15 | s | |
| Low-Side Switching Times (tON) | VPN = 300 V, VCC = VBS = 15 V, IC = 15 A, TJ = 25C, VIN = 0 V 5 V, Inductive Load | 0.45 ~ 1.25 | s |
| Low-Side Switching Times (tC(ON)) | 0.25 ~ 0.50 | s | |
| Low-Side Switching Times (tOFF) | 0.75 ~ 1.25 | s | |
| Low-Side Switching Times (tC(OFF)) | 0.25 ~ 0.50 | s | |
| Low-Side Switching Times (trr) | 0.15 | s | |
| Collector - Emitter Leakage Current (ICES) | VCE = VCES | 1 | mA |
2411011540_onsemi-FNA41560B5_C7451021.pdf
Related Products
power switching device XCH XCH6003 trenched N channel MOSFET with low gate charge and fast switching
Product OverviewThe XCH6003 is a high cell density trenched N-channel MOSFET designed for efficient power switching applications. It offers excellent RDS(ON) and efficiency, making it suitable for most low-power switching and load switch applications. This device features super low gate charge and ...
Surface Mounted Rectifier ZHIDE US3M Series High Voltage 1000V Rectifier for Electronic Circuits
Product OverviewThe US3A-US3M series are surface-mounted high-efficiency rectifiers designed for general-purpose applications. They offer low reverse leakage, high forward surge capability, and high reliability, making them suitable for demanding environments. These rectifiers are guaranteed for ...
Silicon Bidirectional Trigger Diode YFW LLDB3 for Thyristor Phase Control Circuits Lamp Dimming and Speed Control
Product OverviewThe LL-34 LLDB3/LLDB4 are Silicon Bidirectional Trigger Diodes designed for thyristor phase control circuits. They are suitable for applications such as lamp-dimming, universal-motor speed controls, and heat controls.Product AttributesBrand: GuangDongYoufengMicroelectronicsCo,Ltd...
High speed switching transistor YANGJIE DGP15N65CTL designed for hard and soft switching applications
Product OverviewThe DGP15N65CTL0 is a high-speed smooth switching IGBT discrete device designed for hard and soft switching applications. It features a maximum junction temperature of 175, a positive temperature coefficient, and high ruggedness with temperature stability. This IGBT is suitable for ...
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
