86--136 6733 2386
quality inverter output stage onsemi FSBB30CH60F motion spm 3 module with integrated gate drive and protection factory
quality inverter output stage onsemi FSBB30CH60F motion spm 3 module with integrated gate drive and protection factory
quality inverter output stage onsemi FSBB30CH60F motion spm 3 module with integrated gate drive and protection factory

inverter output stage onsemi FSBB30CH60F motion spm 3 module with integrated gate drive and protection

Key Attributes
Model Number: FSBB30CH60F
Product Custom Attributes
Voltage - Isolation:
2500Vrms
Mfr. Part #:
FSBB30CH60F
Package:
DIP-27
Product Description

Product Overview

The FSBB30CH60F is a Motion SPM 3 module designed to provide a high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. It integrates optimized gate drive circuitry to minimize EMI and losses, along with multiple on-module protection features such as under-voltage lockout, over-current shutdown, and fault reporting. Its built-in high-speed HVIC simplifies the power supply requirement to a single voltage and translates logic-level gate inputs to the necessary high-voltage, high-current drive signals for the internal IGBTs. Separate negative IGBT terminals are provided for each phase, enabling flexible control algorithm implementation.

Product Attributes

  • Brand: Fairchild Semiconductor Corporation
  • Series: Motion SPM 3
  • Certification: UL Certified No. E209204 (UL1557)
  • Material: AlN DBC Substrate (for low thermal resistance)

Technical Specifications

ParameterConditionsRatingUnit
Inverter Part
Supply Voltage (VPN)Applied between P- NU, NV, NW450V
Supply Voltage (Surge) (VPN(Surge))Applied between P- NU, NV, NW500V
Collector - Emitter Voltage (VCES)600V
Each IGBT Collector Current (IC)TC = 25C30A
Each IGBT Collector Current (Peak) (ICP)TC = 25C, Under 1ms Pulse Width45A
Collector Dissipation (PC)TC = 25C per Chip103W
Operating Junction Temperature (TJ)-20 ~ 125C
Collector - Emitter Saturation Voltage (VCE(SAT))VCC = VBS = 15 V, VIN = 5 V, IC =30 A, TJ = 25C2.75V
FWDi Forward Voltage (VF)VIN = 0 V, IC =30 A, TJ = 25C2.4V
Switching Times (tON - HS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.49s
Switching Times (tC(ON) - HS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.34s
Switching Times (tOFF - HS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.86s
Switching Times (tC(OFF) - HS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.52s
Switching Times (trr - HS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.10s
Switching Times (tON - LS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.68s
Switching Times (tC(ON) - LS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.47s
Switching Times (tOFF - LS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.90s
Switching Times (tC(OFF) - LS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.50s
Switching Times (trr - LS)VPN = 300 V, VCC = VBS = 15 V, IC = 30 A, VIN = 0 V 5 V, Inductive Load0.10s
Collector - Emitter Leakage Current (ICES)VCE = VCES250A
Control Part
Control Supply Voltage (VCC)Applied between VCC(UH), VCC(VH), VCC(WH), VCC(L) - COM20V
High-Side Control Bias Voltage (VBS)Applied between VB(U) - VS(U), VB(V) - VS(V), VB(W) - VS(W)20V
Input Signal Voltage (VIN)Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) - COM-0.3 ~ 17V
Fault Output Supply Voltage (VFO)Applied between VFO - COM-0.3 ~ VCC+0.3V
Fault Output Current (IFO)Sink Current at VFO Pin5mA
Current-Sensing Input Voltage (VSC)Applied between CSC - COM-0.3 ~ VCC+0.3V
System Ratings
Self-Protection Supply Voltage Limit (VPN(PROT))VCC = VBS = 13.5 ~ 16.5 V, TJ = 125C, Non-Repetitive, < 2 s400V
Module Case Operation Temperature (TC)-20CTJ 125C-20 ~ 100C
Storage Temperature (TSTG)-40 ~ 125C
Isolation Voltage (VISO)60 Hz, Sinusoidal, AC 1 Minute, Connect Pins to Heat Sink Plate2500Vrms
Thermal Resistance
Junction to Case Thermal Resistance (Rth(j-c)Q)Inverter IGBT Part (per 1 / 6 module)0.97C/W
Junction to Case Thermal Resistance (Rth(j-c)F)Inverter FWD Part (per 1 / 6 module)1.77C/W

Applications

  • Motion Control
  • Home Appliance / Industrial Motor

Related Resources

  • AN-9035 - Motion SPM 3 Series Ver.2 Users Guide

2411272116_onsemi-FSBB30CH60F_C3615413.pdf

Related Products
quality Surface Mounted Rectifier ZHIDE US3M Series High Voltage 1000V Rectifier for Electronic Circuits factory
Surface Mounted Rectifier ZHIDE US3M Series High Voltage 1000V Rectifier for Electronic Circuits
Product OverviewThe US3A-US3M series are surface-mounted high-efficiency rectifiers designed for general-purpose applications. They offer low reverse leakage, high forward surge capability, and high reliability, making them suitable for demanding environments. These rectifiers are guaranteed for ...
quality Robust industrial IGBT module YANGJIE MG50HF12TLC1 with low VCEsat and high short circuit capability factory
Robust industrial IGBT module YANGJIE MG50HF12TLC1 with low VCEsat and high short circuit capability
Product OverviewThe MG50HF12TLC1 S-M392 is a high-performance IGBT module designed for inverter applications, AC/DC servo drive amplifiers, UPS systems, and soft switching welding machines. It features low VCE(sat) with Trench technology, a positive temperature coefficient for VCE(sat), high short ...
quality Gallium Nitride Gan Hemts for Broadband Rf Applications Featuring Wolfspeed CGHV40050P Transistor factory
Gallium Nitride Gan Hemts for Broadband Rf Applications Featuring Wolfspeed CGHV40050P Transistor
Product Overview The MACOM CGHV40050 is an unmatched Gallium Nitride (GaN) High Electron Mobility Transistor (HEMT) designed for general-purpose, broadband RF and microwave applications up to 4 GHz. Operating from a 50-volt rail, this device offers high efficiency, high gain, and wide bandwidth ...
quality Surface mount digital transistor YANGJIE DTC114YE with built in resistors and RoHS compliant halogen free epoxy factory
Surface mount digital transistor YANGJIE DTC114YE with built in resistors and RoHS compliant halogen free epoxy
Product OverviewThe DTC114YE is a digital transistor with built-in resistors, designed for surface mount applications and ideally suited for automatic insertion. It features a moisture sensitivity level of 1 and an epoxy that meets UL-94 V-0 flammability rating and is halogen-free. This product is ...
Contact Our Experts And Get A Free Consultation!

Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.