DIACs, SIDACs
High Voltage Silicon Voltage Triggered Switch Littelfuse K1300SRP with Epoxy Flammability Classification 94V 0
Product DescriptionThe SIDAC is a silicon bilateral voltage triggered switch designed for AC circuit applications. Upon exceeding the SIDAC breakover voltage, it switches to a low on-state voltage and maintains conduction until the current drops below the minimum holding current. Featuring glass-passivated junctions for ruggedness and dependability in harsh environments, SIDACs are suitable for high voltage power supplies, natural gas igniters, high-pressure Sodium lamps, and
Phase control SCR Littelfuse S6006DS3TP with glass passivated junctions and surge current capability
Product OverviewThe Sxx06x SCR series is designed for uni-directional switch applications, including phase control, heating, motor speed controls, converters/rectifiers, and capacitive discharge ignitions. These SCRs feature a low gate current trigger level, with a sensitive version offering a gate trigger current less than 500A, making it easily triggered by sense coils, proximity switches, and microprocessors. The series boasts glass-passivated junctions, voltage capabiliti
Half Wave AC Control Device Littelfuse MCR8SMG with TO220AB Package and High Surge Current Capability
Product OverviewThe MCR8SDG, MCR8SMG, and MCR8SNG are sensitive gate silicon controlled rectifiers designed for half-wave AC control applications. Their sensitive gate allows triggering by microcontrollers and other logic circuits. These devices offer blocking voltages up to 800V, an on-state current rating of 8A RMS, and high surge current capability. Featuring glass-passivated junctions for reliability, they are housed in a rugged, economical TO-220AB package. Ideal for
1.5 Amp Sensitive Gate SCR Littelfuse S402TSRP with 400 Volt Blocking Voltage and Fast Turn Off Time
Thyristors EV Series 1.5 Amp Sensitive SCRsThe new 1.5 Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through a small die planar construction design. All SCR junctions are glass-passivated to ensure long-term reliability and parametric stability. The Sx02xS EV series is specifically designed for solenoid drive applications, often seen in GFCI and similar safety cut-off devices. Key features include surge capability greater than 15 Amps,
Durable Littelfuse K2500GRP silicon bilateral voltage triggered switch for high voltage power supplies
Teccor SIDACs Standard Bidirectional SIDACs Kxxxzy The SIDAC is a silicon bilateral voltage triggered switch that activates when the applied voltage exceeds its breakover voltage. It then switches to a low on-state voltage through a negative resistance region, continuing conduction until the current is interrupted or falls below the holding current. Featuring glass-passivated junctions, these SIDACs offer a rugged and dependable solution for harsh environments. They are
High Voltage SCR Littelfuse 2N6509G Silicon Controlled Rectifier for Heating and Motor Applications
Product OverviewThe 2N6504 Series is a line of Silicon Controlled Rectifiers (SCRs) designed for half-wave AC control applications. These devices feature glass-passivated junctions for enhanced parameter uniformity and stability, and a Thermowatt construction for low thermal resistance and high heat dissipation. They are suitable for applications such as motor controls, heating controls, and power supply crowbar circuits.Product AttributesBrand: ON SemiconductorPb-Free
Unidirectional SCR Thyristor Littelfuse S4015LTP Designed for Motor Speed and Heating Control Systems
Product OverviewThe Teccor Sxx15x and Sxx16x Series are standard SCR thyristors designed for unidirectional switching in phase control applications. They offer excellent performance for heating and motor speed controls, triggered by low current and voltage. These SCRs feature glass-passivated junctions, voltage capabilities up to 1000V, and surge capabilities up to 225A. They are RoHS-compliant and suitable for various applications including capacitive discharge systems,
Voltage Triggered Switch Littelfuse K1100E70 Featuring Low Holding Current and Breakover Voltage for Industrial
Product DescriptionThe SIDAC is a silicon bilateral voltage triggered switch designed for AC circuit applications. It switches on when the applied voltage exceeds the SIDAC breakover voltage, transitioning through a negative resistance region to a low on-state voltage. Conduction is maintained until the current drops below the minimum holding current. Featuring glass-passivated junctions for ruggedness and reliability in harsh environments, SIDACs are suitable for high
Glass Passivated Junction Voltage Triggered Switch Littelfuse K2000G for Operation in Harsh Conditions
Product DescriptionThe SIDAC is a silicon bilateral voltage triggered switch designed for AC circuit applications. It switches on when the applied voltage exceeds its breakover voltage, entering a negative resistance region to a low on-state voltage. Conduction persists until the current is interrupted or falls below the minimum holding current. Featuring glass-passivated junctions, SIDACs offer ruggedness and dependability for harsh environments. Suitable for high voltage
Sensitive gate SCR Littelfuse SK008VTP with voltage rating from 400 to 1000 volts and 8 amp current
Product DescriptionThe Sxx08x SCR series is designed for uni-directional switch applications, including phase control, heating, motor speed controls, converters/rectifiers, and capacitive discharge ignitions. These SCRs feature a low gate current trigger level (0.2 to 15 mA at approximately 1.5V). The sensitive gate versions offer a gate trigger current of less than 500A, making them easily triggered by sense coils, proximity switches, and microprocessors. Key advantages
SCR transistor LGE MCR22-6G offering 1.5 amperes on state current and 0.9 A2S circuit fusing rating
Product OverviewDesigned and tested for repetitive peak operation, these SCR transistors are ideal for CD ignition, fuel ignitors, flash circuits, motor controls, and low-power switching applications. They offer a 150 Amperes for 2ms Safe Area, high dv/dt, very low on-state voltage at high current, and come in a low-cost TO-92 package.Product AttributesBrand: MCR22Model: MCR22-6G, MCR22-8GPackage: TO-92 Plastic-EncapsulateTechnical SpecificationsParameterSymbolMCR22-6GMCR22
ignition control Littelfuse K2500GHRP with wide voltage activation and high pulse current performance
Product DescriptionThe Kxxx0yH is a high-energy, bidirectional SIDAC switch designed for gas ignition applications requiring high current pulses, especially at low repetition rates. It offers voltage activation from 190 to 280 Volts and switches through a negative resistance region to a low on-state voltage, continuing conduction until the current is interrupted or falls below the minimum holding current. Available in DO-15, TO-92, and DO-214 packages, this solid-state switch
Surface Mount Thyristor Littelfuse MCR12DSNT4G for Capacitive Discharge Ignition and Process Control
Product OverviewThe MCR12DSM and MCR12DSN are surface mount thyristors designed for high volume, low cost, industrial and consumer applications. They feature a passivated die surface for reliability, low level triggering and holding characteristics, and are UL recognized with a V-0 flammability rating. These devices are suitable for applications such as motor control, process control, temperature, light and speed control, CDI (Capacitive Discharge Ignition), and small engines
High Voltage Littelfuse K1200E70 SIDAC Switch with Negative Resistance Region and Low On State Voltage
Product OverviewThe SIDAC is a silicon bilateral voltage triggered switch designed for high-voltage applications. It switches on when the applied voltage exceeds its breakover voltage, transitioning through a negative resistance region to a low on-state voltage. Conduction is maintained until the current drops below the holding current. Featuring glass-passivated junctions for ruggedness and reliability, SIDACs are suitable for harsh environments. Applications include high
SCR device Littelfuse S4008VTP featuring low gate trigger current and surge current up to 100 amps
Product Overview The Sxx08x SCR series is designed for uni-directional switch applications, including phase control, heating, motor speed controls, converters/rectifiers, and capacitive discharge ignitions. These SCRs feature a low gate current trigger level, with a sensitive version offering a gate trigger current below 500A, making it easily triggered by sense coils, proximity switches, and microprocessors. They boast voltage capabilities up to 1000V and surge capabilities
SCR Littelfuse SV8012DRP designed for phase control converters rectifiers and inrush current control
SVxx12xx Series 12 Amp High Junction Temperature SCRsThe SVxx12xx series of high junction temperature SCRs are designed for unidirectional switch applications. They are ideal for phase control in heating, motor speed controls, converters/rectifiers, inrush current control, and capacitive discharge ignitions. These SCRs feature a low gate current trigger level and a maximum junction temperature of 150C, offering high dv/dt performance and surge capability up to 120A.
600 Volt Blocking Voltage Surface Mount Thyristor Littelfuse NYC228STT1G 15 Amp Surge Current SOT223
Product OverviewThe NYC222, NYC226, and NYC228 are surface-mount thyristors designed for repetitive peak operation in applications such as CD ignition, fuel ignitors, flash circuits, motor controls, and low-power switching. They offer blocking voltages up to 600V, high surge current capability of 15A, very low forward "on" voltage at high current, and come in a low-cost SOT-223 package. These devices are Pb-Free.Product AttributesBrand: LittelfuseCertifications: Pb-FreeTechni
Industrial power tool phase control device Littelfuse SK055RTP with voltage capability up to 1000 volts
Product OverviewExcellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1.5V potential. RoHS-compliant with glass-passivated junctions, offering voltage capability up to 1000V and surge capability up to 650A. Typical applications include AC solid-state switches, industrial power tools, exercise equipment, white goods, and commercial
Silicon Controlled Rectifier Littelfuse MCR8SDG 8 Amp 400 Volt TO220AB Package Half Wave AC Control
Product OverviewThe MCR8SDG, MCR8SMG, and MCR8SNG are sensitive gate silicon controlled rectifiers designed for half-wave AC control applications. Their sensitive gate allows triggering by microcontrollers and other logic circuits. These devices offer blocking voltages up to 800V, an on-state current rating of 8A RMS, and high surge current capability. Featuring glass-passivated junctions for reliability and uniformity, they are housed in a rugged, economical TO-220AB package
Thermowatt construction thyristor Littelfuse 2N6405G designed for ac control in industrial systems
Product OverviewThe 2N6400 series Thyristors are designed for half-wave AC control applications. Featuring glass-passivated junctions for enhanced uniformity and stability, these devices offer a small, rugged Thermowatt construction for low thermal resistance and high heat dissipation. They provide blocking voltages up to 800V and are Pb-free. Ideal for motor controls, heating controls, power supplies, and other applications requiring half-wave silicon gate-controlled solid
